Sundar Atre
Professor, Endowed Chair-Manufacturing & Materials
Dr. Atre is leading an effort to establish a new inter-disciplinary program on Digital Manufacturing and Design at the University of Louisville. Dr. Atre's current research in advanced materials and multi-scale manufacturing focus on additive manufacturing and powder injection molding of metal and ceramics. His research group, the Materials Innovation Guild, has generated over 200 publications, 7 issued and licensed patents, and over 20 intellectual property filings. Additional details can be found at his research website.
Education
- Ph.D. in Materials Science & Engr, Penn State University, 1995
Publications
Printability Studies of Ti-6Al-4V by Metal Fused Filament Fabrication (MF3)- 2020
Learn More
Journal Articles
- Atre, S., V., Akilan, A., A., Gokce, A., Balla, V., Nath, S. & Kate, K. (2020). Laser Powder Bed Fusion of In-Situ Composites Using Dry-Mixed Ti6Al4V and Si3N4 Powder . Journal of Manufacturing Processes , 59, 43-50
- Momenzadeh, N., Nath, S., D., Berfield, T., A. & Atre, S., V. (2019). In Situ Measurement of Thermal Strain Development in 420 Stainless Steel Additive Manufactured Metals. Experimental Mechanics
- Nath, S., D., Irrinki, H., Gupta, G., Kearns, M., Gulsoy, O. & Atre, S., V. (2019). Microstructure-property relationships of 420 stainless steel fabricated for by laser-powder bed fusion. POWDER TECHNOLOGY, 343, 738-746
- Ghayoor, M., Badwe, S., Irrinki, H., Atre, S., V. & Pasebani, S. (2018). Water Atomized 17-4 PH Stainless Steel Powder as a Cheaper Alternative Powder Feedstock for Selective Laser Melting. Materials Science Forum, 941, 698-703
- Irrinki, H., Jangam, John Samuel Dilip, ., Pasebani, S., Badwe, S., Stitzel, J., Kate, K., H., Gulsoy, O. & Atre, S., V. (2018). Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion. Powder Technology, 331, 192-203
- Enneti, R., K., Morgan, R. & Atre, S., V. (2018). Effect of process parameters on the Selective Laser Melting (SLM) of tungsten. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 71, 315-319
- Pasebani, S., Ghayoor, M., Badwe, S., Irrinki, H. & Atre, S., V. (2018). Effects of atomizing media and post processing on mechanical properties of 17-4 PH stainless steel manufactured via selective laser melting. ADDITIVE MANUFACTURING, 22, 127-137
- Park, J., M., Han, J., S., Gal, C., W., Oh, J., W., Kate, K., H., Atre, S., V., Kim, Y. & Park, S., J. (2018). Effect of binder composition on rheological behavior of PMN-PZT ceramic feedstock. Powder Technology, 330, 19-26
- Kate, K., H., Enneti, R. & Atre, S., V. (2017). Influence of feedstock properties on the injection molding of aluminum nitride. The International Journal of Advanced Manufacturing Technology, 90(9-12), 2813-2826
- Lin, D., Sanetrnik, D., Cho, H., Chung, S., T., Kwon, Y., S., Kate, K., H., Hausnerova, B., Atre, S., V. & Park, S., J. (2017). Rheological and thermal debinding properties of blended elemental Ti-6Al-4V powder injection molding feedstock. Powder Technology, 311, 357-363
- Enneti, R., K., German, R., M. & Atre, S., V. (2017). Effects Of Lubricant And Part Geometry On The Ejection Characteristics During Die Compaction. Powder Metallurgy, 60, 337-344
- Chinn, R., Kate, K., H. & Atre, S., V. (2016). Powder injection molding of silicon carbide: processing issues. Metal Powder Report, 71(6), 460-464
- Chinn, R., Atre, S., V., Kate, K., H., Onler, R. & Ozdoganlar, B. (2016). Microstructural Development of Green Micro-Machined, Injection-Molded Silicon Carbide. Microscopy and Microanalysis, 22(S3), 1818-1819
- Chinn, R., Atre, S., V., Kate, K., H., Onler, R. & Ozdoganlar, B. (2016). Microstructural Development of Green Micro-Machined, Injection-Molded Silicon Carbide. Microscopy and Microanalysis, 22(S3), 1818-1819
- Chinn, R., Kate, K. & Atre, S., V. (2016). Powder Injection Molding Of Silicon Carbide: Processing Issues. Metal Powder Report
- Irrinki, H., Barmore, B., Kate, K. & Atre, S., V. (2016). Material Selection For The Production Of Injection Moulding Tooling By Additive Manufacturing. Metal Additive Manufacturing, 76-89
- Irrinki, H., Dexter, M., Barmore, B., Stitzel, J., Enneti, R., Pasebani, S., Badwe, S., Malhotra, R. & Atre, S., V. (2016). Effects of Powder Attributes and Laser Powder Bed Fusion (L-PBF) Process Conditions on the Densification and Mechanical Properties of 17-4 PH Stainless Steel. JOM, 68, 860-868
- Kate, K., H., Enneti, R., McCabe, T. & Atre, S., V. (2016). Simulations And Injection Molding Experiments For Aluminum Nitride Feedstock. Ceramics International, 42, 194–203
- Kate, K., H., Enneti, R., McCabe, T. & Atre, S., V. (2016). Simulations and injection molding experiments for aluminum nitride feedstock. Ceramics International, 42(1), 194-203
- Lin, D., Saeternik, D., Chung, S., Kwon, Y., Kate, K., Hausnerova, B., Atre, S., V. & Park, S. (2016). Rheological And Thermal Debinding Properties Of Blended Elemental Ti-6Al-4V Powder Injection Molding Feedstock. Powder Technology
- Martin, R., Enneti, R., Vick, M. & Atre, S., V. (2015). Sintering Characteristics Of A Powder Injection Molded Ceria-Stabilized Zirconia-Mullite Composite. Materials and Manufacturing Processes, 30, 616–623
- Kate, K., H., Onbattuvelli, V., P., Enneti, R., K., Lee, S., W., Park, S. & Atre, S., V. (2012). Measurements of Powder-Polymer Mixture Properties and Their Use in Powder Injection Molding Simulations for Aluminum Nitride. JOM, 64(9), 1048-1058
- Lenz, J., Enneti, R., K., Onbattuvelli, V., Kate, K., H., Martin, R. & Atre, S., V. (2012). Powder Injection Molding of Ceramic Engine Components for Transportation. JOM, 64(3), 388-392
- ALLARA, D., L., ATRE, S., TAO, Y., T. & CHAMBERLAND, M. (1990). MODEL ORGANIC-SURFACES VIA MICROMOLECULAR AND MACROMOLECULAR MONOLAYER FILMS. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 199
- ALLARA, D., L., PARIKH, A., N., ATRE, S., V. & SHEEN, C., W. (1992). ADVANCES IN QUANTITATIVE CHARACTERIZATION OF SELF-ASSEMBLED FILMS BY INFRARED-SPECTROSCOPY-APPLICATIONS TO STRUCTURAL CORRELATIONS IN DIVERSE ASSEMBLY SYSTEMS. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 203
- Ahn, S., Park, S., German, R., M., Kang, T., G. & Atre, S., V. (2007). Numerical Investigations of Mixing for Powder Injection Molding Feedstock. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1, 01
- Ahn, S., Park, S., J., Lee, S., Atre, S., V. & German, R., M. (2009). Effect of powders and binders on material properties and molding parameters in iron and stainless steel powder injection molding process. Powder Technology, 193(2), 162--169
- Allara, D., L., Atre, S., V., Parikh, A., N., Feast, W., Munro, H. & Richards, R. (1993). Polymer Surfaces and Interfaces II.
- Atre, S., V. & Allara, D., L. (1990). Chemical Functionalization of Strongly Adsorbed Polymer Monolayers via Liquid/Solid Interfacial Reactions. Polymer Preprints, 31(2), 550--551
- Atre, S., V. & German, R., M. (2000). Quantitative Analysis of Thermal Debinding. Advances in Powder Metallurgy and Particulate Materials, 2(4/5), 4--23
- Atre, S., V. & German, R., M.Analysis of thermal debinding.
- Atre, S., V., Bhowmik, S., Valmikanathan, O., P. & Ostroverkhova, O.Fabrication and optical properties of nanoscale arrays of Au and Pd in polymers.
- Atre, S., V., Bothara, M., Park, S., German, R., M., Sudershan, T., S. & Radhakrishnan, R. (2007). Master Sintering-Curve Analysis of Liquid-Phase Sintered, Nanoscale Silicon Carbide Fabricated in a Plasma Pressure Compaction System. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 2, 08
- Atre, S., V., Cai, L. & German, R., M. (1996). The Design of Molding Feedstocks Consisting of Polysaccharide Gels and Metal Powders. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 5, 19--243
- Atre, S., V., Cohen, P., Menendez, K. & Goldsboro, N., C. (2002). Influence of Powder Characteristics on Green Machining Performance. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS(12), 12--138
- Atre, S., V., Enneti, R., K., Park, S., J. & German, R., M. (2008). Master decomposition curve analysis of ethylene vinyl acetate pyrolysis: influence of metal powders. Powder Metallurgy, 51(4), 368--375
- Atre, S., V., Halls, S., D., Sghaier, K. & German, R., M. (1999). The Effect of Particle Characteristics on the Flow Attributes of Fine Powders. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1(1/3), 3--227
- Atre, S., V., Kuhar, A., J., Cronin, K. & German, R., M. (2001). Process modeling of thermal debinding. Advances in Powder Metallurgy and Particulate Materials(1), 1--97
- Atre, S., V., Monfared, N., Bothara, M., Prasad, S. & Varadarajan, S. (2008). Chemically modified polacrylic acid monolayers in alumina nanoporous membranes for cancer detection. Nanotechnology, 351354
- Atre, S., V., Onbattuvelli, V., P., Rochefort, W., E., Simonsen, J., Park, S. & German, R., M. (2007). Studies on the Thermal Stability of Pd/PC Nanocomposites. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1, 01
- Atre, S., V., Park, S., J., German, R., M. & Enneti, R., K. (2006). Master Decomposition Curve for Binders in Die Compaction Processing. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1, 01
- Atre, S., V., Park, S., Zauner, R. & German, R., M. (2007). Process simulation of powder injection moulding: identification of significant parameters during mould filling phase. Powder Metallurgy, 50(1), 76--85
- Atre, S., V., Scott, C., Thomas, J., A. & German, R., M. (2001). A Microstructural Model for Feedstock Homogeneity. Advances in Powder Metallurgy and Particulate Materials(4), 4--131
- Atre, S., V., Shoales, G., A. & German, R., M. (1999). Strength evolution during the thermal debinding of PIM components. Advances in Powder Metallurgy and Particulate Materials, 6, 89--101
- Atre, S., V., Thomas, J., A., German, R., M. & Shivashankar, T., S. (1997). A Novel Process for Particle Size Enlargement. Particulate Science and Technology, 15(2), 163--163
- Atre, S., V., Valmikanathan, O., P., Pillai, V., K., Mulla, I., S. & Ostroverkhova, O.The Effect of Nanoparticle Distribution on The Structure and Properties of Palladium/Polycarbonate Nanocomposites.
- Atre, S., V., Weaver, T., J. & German, R., M.Injection molding of metals and ceramics.
- Atre, S., V., Wu, C., Park, S., J. & Simmons, K.Design & Fabrication of Ceramic Microarrays Using Powder Injection Molding.
- Atre, S., V., Wu, C., Simmons, K., L., Laddha, S., Jain, K., Lee, S., Park, S., J. & German, R., M.Ceramic Microarrays for Aggressive Environments.
- Bhowmik, S., Holm, A., Ostroverkhova, O. & Atre, S. (2011). Metallic nanostructures in a polymer matrix and substrate fabrication and structural characterization. Applied Physics A, 103(4), 1117--1123
- Bothara, M., Atre, S., V., Park, S., German, R., M., Sudarshan, T., S., Radhakrishnan, R. & Ostroverkhova, O.Nanoscale SiC Sintered Structures for Advanced Microsystems and Power Electronics Packaging.
- Bothara, M., Atre, S., V., Park, S., J., German, R., M., Sudarshan, T., S. & Radhakrishnan, R. (2007). Densification and grain growth during the sintering of nanoscale SiC. NSTI Nanotech, 4
- Bothara, M., G., Atre, S., V., Park, S., German, R., M., Sudarshan, T., S. & Radhakrishnan, R. (2010). Sintering behavior of nanocrystalline silicon carbide using a plasma pressure compaction system: master sintering curve analysis. Metallurgical and Materials Transactions A, 41(12), 3252--3261
- Bothara, M., G., Vijay, P., Atre, S., V., Park, S., J., German, R., M., Sudarshan, T., S. & Radhakrishnan, R. (2009). Design of experiment approach for sintering study of nanocrystalline SiC fabricated using plasma pressure compaction. Science of Sintering, 41(2), 125--133
- Browning, D., M., Curtis, J., R., Jovanovic, G., N., Paul, B., K. & Atre, S. (2012). MECS dialyzer.
- Browning, D., M., Curtis, J., R., Jovanovic, G., N., Paul, B., K. & Atre, S. (2013). MECS dialyzer method.
- Chang, C., Paul, B., K., Remcho, V., T., Atre, S. & Hutchison, J., E. (2008). Synthesis and post-processing of nanomaterials using microreaction technology. Journal of Nanoparticle Research, 10(6), 965--980
- De, S., Atre, S., V. & De, S. (2011). Brazilian environmental legislation and sustainable national mining and metallurgy development: The economic and/or environmental necessity. Tecnologia em Metalurgia, Materiais e Mineracao, 20110718, 1086--1096
- De, S., Atre, S., V., Suri, P., K., Thomas, J., A. & German, R., M. (2003). UNDERSTANDING HOMOGENEITY OF POWDER-POLYMER MIXTURES--EFFECT OF MIXING ON TUNGSTEN POWDER INJECTION MOLDING FEEDSTOCK. Revista Metalurgia e Materials, 59(534), 16--19
- Enneti, R., K., Atre, S., V. & German, R., M. (2005). Innovative process to die compact injection molding powders. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1, 3
- Enneti, R., K., Carney, C., M., Park, S. & Atre, S., V.Taguchi Analysis on the Effect of Process Parameters on Densification During Spark Plasma Sintering of HfB2-20SiC (Preprint).
- Enneti, R., K., Carney, C., Park, S. & Atre, S., V. (2012). Taguchi analysis on the effect of process parameters on densification during spark plasma sintering of HfB2-20SiC. International Journal of Refractory Metals and Hard Materials, 31, 293--296
- Enneti, R., K., Lusin, A., Kumar, S., German, R., M. & Atre, S., V. (2013). Effects of lubricant on green strength, compressibility and ejection of parts in die compaction process. Powder technology, 233, 22--29
- Enneti, R., K., Park, S., J., German, R., M. & Atre, S., V. (2011). IN SITU OBSERVATION OF SHAPE LOSS DURING POLYMER BURNOUT IN PM PROCESSING.. International Journal of Powder Metallurgy, 47(3)
- Enneti, R., K., Park, S., J., German, R., M. & Atre, S., V. (2012). In Situ Characterization of Strength and Distortion During Powder Metal Processing. JOM, 64(1), 28--34
- Enneti, R., K., Shivashankar, T., S., Park, S., German, R., M. & Atre, S., V. (2012). Master debinding curves for solvent extraction of binders in powder injection molding. Powder technology, 228, 14--17
- German, R., M., Weaver, T., J., Thomas, J., A., Atre, S., V. & Griffo, A. (2002). Powdered material rapid production tooling method and objects produced therefrom.
- Jain, K., Wu, C., Atre, S., Jovanovic, G., Narayanan, V., Kimura, S., Sprenkle, V., Canfield, N. & Roy, S.Design, Fabrication & Testing of a Ceramic Microreactor for Nanoparticle Synthesis.
- Jain, K., Wu, C., Atre, S., V., Jovanovic, G., Narayanan, V., Kimura, S., Sprenkle, V., Canfield, N. & Roy, S. (2009). Synthesis of nanoparticles in high temperature ceramic microreactors: design, fabrication and testing. International Journal of Applied Ceramic Technology, 6(3), 410--419
- Jovanovic, G., Atre, S., V., Paul, B., K., Simonsen, J., Remcho, V., T. & Chang, C. (2012). Microfluidic devices, particularly filtration devices comprising polymeric membranes, and method for their manufacture and use.
- Kate, K., H., Enneti, R., K., Onbattuvelli, V., P. & Atre, S., V. (2013). Feedstock properties and injection molding simulations of bimodal mixtures of nanoscale and microscale aluminum nitride. Ceramics International, 39(6), 6887--6897
- Kate, K., H., Enneti, R., K., Park, S., German, R., M. & Atre, S., V. (2014). Predicting powder-polymer mixture properties for PIM design. Critical reviews in solid state and materials sciences, 39(3), 197--214
- Kate, K., H., Onbattuvelli, V., P., Enneti, R., K., Lee, S., W., Park, S. & Atre, S., V. (2012). Measurements of powder--polymer mixture properties and their use in powder injection molding simulations for aluminum nitride. JOM, 64(9), 1048--1058
- Kelly, M., M., Pan, M., Atre, S., Rancourt, G., Heyes, A. & Vick, M., J. (2012). Ceramic micro channel recuperator fabrication methods for small gas turbine engines. ASME Turbo Expo 2012: Turbine Technical Conference and Exposition
- Kim, J., Ahn, S., Atre, S., V., Park, S., J., Kang, T., G. & German, R., M. (2014). Imbalance filling of multi-cavity tooling during powder injection molding. Powder Technology, 257, 124--131
- Kim, S., Park, S., J., German, R., M. & Atre, S., V. (2007). Simulation of binder-powder separation in powder injection molding. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1, 01
- Koo, E., Yoon, S., Atre, S., V. & Allara, D., L. (2011). Robust, functionalizable, nanometer-thick poly (acrylic acid) films spontaneously assembled on oxidized aluminum substrates: Structures and chemical properties. Langmuir, 27(7), 3638--3653
- Laddha, S., G., Wu, C., Park, S., Lee, S., Ahn, S., German, R., M. & Atre, S., V. (2010). CHARACTERIZATION AND SIMULATION OF MACROSCALE MOLD-FILLING DEFECTS IN MICROMINIATURE POWDER INJECTION MOLDING.. International Journal of Powder Metallurgy, 46(3)
- Laddha, S., Wu, C., Atre, S., V., Lee, S., Simmons, K., Park, S. & German, R., M. (2008). Ceramic Microarrays for Aggressive Environments. NSTI Nanotech, 3
- Laddha, S., Wu, C., Vallury, S., Lingam, G., Lee, S., Simmons, K., Thomas, P., Levenfeld, B., V'arez, A., Park, S., J. & others, . (2009). Characterisation of alumina feedstock with polyacetal and wax-polymer binder systems for micro powder injection moulding. PIM Int, 3, 64--70
- Lee, S., W., Ahn, S., Whang, C., J., Park, S., J., Atre, S., V., Kim, J. & German, R., M. (2011). Effects of process parameters in plastic, metal, and ceramic injection molding processes. Korea-Australia Rheology Journal, 23(3), 127
- Lenz, J., Enneti, R., K., Onbattuvelli, V., Kate, K., Martin, R. & Atre, S. (2012). Powder injection molding of ceramic engine components for transportation. Jom, 64(3), 388--392
- Lenz, J., Enneti, R., K., Park, S. & Atre, S., V. (2014). Powder injection molding process design for UAV engine components using nanoscale silicon nitride powders. Ceramics International, 40(1), 893--900
- Martin, R., Vick, M., Enneti, R., K. & Atre, S., V. (2013). Powder injection molding of ceria-stabilized, zirconia-toughened mullite parts for UAV engine components. JOM, 65(11), 1388--1394
- Martin, R., Vick, M., Kelly, M., Souza, J., P., Enneti, R., K. & Atre, S., V. (2013). Powder injection molding of a mullite--zirconia composite. Journal of Materials Research and Technology, 2(3), 263--268
- Meka, D., Onbattuvelli, V., Atre, S. & Prasad, S. (2008). Palladium/polymer nanocomposite based chemiresistive SO 2 sensor. Clean Technology, 4, 412--415
- Meka, D., Onbattuvelli, V., Atre, S. & Prasad, S.Nanomonitors for Energy Systems.
- Monfared, N., A., Atre, S., V., Kishton, R. & Varadarajan, S. (2009). Synthesis and characterization of nanoporous alumina films with controlled physical and chemical attributes. NSTI-Nanotech, 1
- Monfared, N., A., Varadarajan, S., De, S. & Atre, S., V. (2011). Effect of process parameters on the nanoporous structure of anodized alumina. Tecnologia em Metalurgia, Materiais e Mineracao, 20110718, 330--339
- Noorani, S., Simonsen, J. & Atre, S. (2006). Polysulfone-cellulose nanocomposites.
- Onbattuvelli, V. & Atre, S. (2011). Review of net shape fabrication of thermally conducting ceramics. Materials and Manufacturing Processes, 26(6), 832--845
- Onbattuvelli, V., Laddha, S., Park, S., Souza, J. & Atre, S., V. (2013). Powder injection molding of SiC for thermal management. Tecnologia em Metalurgia, Materiais e Minerac{c}~ao, 9(2), 123--131
- Onbattuvelli, V., P., Atre, S., V., McCabe, T. & Laddha, S. (2011). The effect of nanoparticles on the processing and properties of Aluminum Nitride by powder injection molding. ASME 2011 International Manufacturing Science and Engineering Conference
- Onbattuvelli, V., P., Atre, S., V., Ostroverkhova, O. & Pillai, V., K.Effect of Particle Morphology and Content on the Properties of Palladium/Polycarbonate Nanocomposites.
- Onbattuvelli, V., P., Chinn, R., Enneti, R., K., Park, S. & Atre, S., V. (2014). The effects of nanoparticle addition on binder removal from injection molded silicon carbide. Ceramics International, 40(9), 13861--13868
- Onbattuvelli, V., P., Enneti, R., K. & Atre, S., V. (2012). The effects of nanoparticle addition on the densification and properties of SiC. Ceramics International, 38(7), 5393--5399
- Onbattuvelli, V., P., Enneti, R., K., Park, S. & Atre, S., V. (2013). The effects of nanoparticle addition on binder removal from injection molded aluminum nitride. International Journal of Refractory Metals and Hard Materials, 36, 77--84
- Onbattuvelli, V., P., Laddha, S., Park, S., De, S. & Atre, S., V. (2011). SiC for the powder injection molding of thermal management devices. Tecnologia em Metalurgia, Materiais e Mineracao, 20110718, 319--329
- Onbattuvelli, V., P., Rochefort, W., E., Simonsen, J., Park, S., German, R., M. & Atre, S., V. (2010). Studies on the thermal stability and degradation kinetics of Pd/PC nanocomposites. Journal of applied polymer science, 118(6), 3602--3611
- Onbattuvelli, V., P., Vallury, S., McCabe, T., Park, S., J. & Atre, S., V. (2010). Properties of SiC and AlN feedstocks for the powder injection moulding of thermal management devices. Powder Injection Moulding International, 4(3), 64--70
- Onbattuvelli, V., Purdy, G., Kim, G., Laddha, S. & Atre, S., V. (2010). Bimodal powder mixture for the powder injection molding of SiC and AlN. Nanotech, 1, 800--803
- Onbattuvelli, V., Purdy, G., Kim, G., Laddha, S. & Atre, S. (2010). Powder injection molding of bimodal $mu$--n silicon carbide and aluminum nitride ceramics. Advances in Powder Metallurgy and Particulate Materials, 1, 64--72
- Onbattuvelli, V., Purdy, G., Ramamoorthi, S. & Atre, S. (2010). Effect of bimodal micro-nano powder mixture on the solids loading and pressureless sintering of silicon carbide and aluminum nitride. NSTI Nanotech, 1
- Park, S., J., Ahn, S., Kang, T., G., Chung, S., Kwon, Y., Chung, S., H., Kim, S., Kim, S., Atre, S., V., Lee, S. & others, . (2010). A review of computer simulations in powder injection molding. International Journal of Powder Metallurgy, 46(3), 37--46
- Sahakian, M., V., Brown, M., O., Atre, S., V. & Haapala, K., R. (2011). Environmental and Cost Assessment of Several Injection Molded Powder Electronics Packaging Materials. ASME 2011 International Manufacturing Science and Engineering Conference
- Shivashankar, T., S., Enneti, R., K., Park, S., German, R., M. & Atre, S., V. (2013). The effects of material attributes on powder--binder separation phenomena in powder injection molding. Powder technology, 243, 79--84
- Sunanta, O., Cohen, P., H. & Atre, S. (2004). Material Removal and Dimensional Integrity of Green Machined W-Ni-Fe. ASME 2004 International Mechanical Engineering Congress and Exposition
- Suri, P., Atre, S., V., German, R., M. & Souza, J., P. (2003). Effect of mixing on the rheology and particle characteristics of tungsten-based powder injection molding feedstock. Materials Science and Engineering: A, 356(1-2), 337--344
- Suri, P., Atre, S., V., Thomas, J., A., Sghaier, K. & German, R., M. (2000). Homogeneity of Powder-Binder Mixtures: A Microstructural Model. Advances in Powder Metallurgy and Particulate Materials, 2(4/5), 4--35
- Suri, P., K., Atre, S., V. & German, R., M. (2002). Effects of Mixing on the Rheology of Alumina Feedstocks. Advances in powder metallurgy and particulate materials(10), 10--23
- Togwe, T., Atre, S., V., Thomas, J., A., Joys, J. & German, R., M. (2000). A Performance Study of Production Tooling Obtained by a P/M Route. ADVANCES IN POWDER METALLURGY AND PARTICULATE MATERIALS, 1(1/3), 3--43
- Urval, R., Lee, S., Atre, S., V., Park, S. & German, R., M. (2008). Optimisation of process conditions in powder injection moulding of microsystem components using a robust design method: part I. primary design parameters. Powder Metallurgy, 51(2), 133--142
- Urval, R., Lee, S., Atre, S., V., Park, S. & German, R., M. (2010). Optimisation of process conditions in powder injection moulding of microsystem components using robust design method Part 2--Secondary design parameters. Powder metallurgy, 53(1), 71--81
- Urval, R., Wu, C., Atre, S., V., Park, S. & German, R., M. (2007). CAE-based process design of PIM for microfluidic device components. Powder Injection Moulding Int, 7--12
- Valmikanathan, O., P., Atre, S., V., Ostroverkhova, O., Pillai, V., K. & Mulla, I., S. (2007). The Effect of nanoparticle distribution on the structure and properties of palladium/polycarbonate nanocomposites. NSTI-Nanotech, 1
- Valmikanathan, O., P., Bhowmik, S., Ostroverkhova, O., Shanker, B. & Atre, S., V. (2006). Fabrication and properties of nanoscale metallic arrays in polymers. science, 102, 4304--4313
- Valmikanathan, O., P., Meka, D., Prasad, S. & Atre, S., V.Structure-property relationships in Pd/PC nanocomposites based chemical sensors.
- Valmikanathan, O., P., Ostroverkhova, O., Mulla, I., S., Vijayamohanan, K. & Atre, S., V. (2008). The effect of synthesis procedure on the structure and properties of palladium/polycarbonate nanocomposites. polymer, 49(16), 3413--3418
- Wu, C., Atre, S., V., Whychell, D., Park, S., German, R., M. & Hall, C. (2007). Nanoparticle building blocks for powder injection molded microsystems. NSTI Nanotech 2007, Technical Proceedings
- Wu, C., Atre, S., V., Whychell, D., Park, S., German, R., M., Insitute, M. & Furnaces, C., M.Powder Injection Molded Ceramic Microsystems.
- Ahn, S., Chung, S., T., Atre, S., V., Park, S., J. & German, R., M. (2008). Integrated filling, packing and cooling CAE analysis of powder injection moulding parts. Powder Metallurgy, 51(4), 318--326
- Allara, D., L., Atre, S., V. & Parikh, A., N. (1992). Self-assembled molecular films as polymer surface models. Polymer Surfaces, 27--47
- Allara, D., L., Atre, S., V., Elliger, C., A. & Snyder, R., G. (1991). The formation of a crystalline monolayer of folded molecules by solution self-assembly of. alpha.,. omega.-alkanedioic acids on silver. Journal of the American Chemical Society, 113(5), 1852--1854
- Atre, S., V., Kate, K., H., Singh, P., Shaikh, Q. & Balla, V. (2020). Estimating Powder-Polymer Material Properties Used in Design for Metal Fused Filament Fabrication (DfMF3) . JOM , 72, 485-495
- Atre, S., V., Liedberg, B., O. & Allara, D., L. (1995). Chain length dependence of the structure and wetting properties in binary composition monolayers of OH-and CH3-terminated alkanethiolates on gold. Langmuir, 11(10), 3882--3893
- Atre, S., V., Nath, S., Gulsoy, O., Kearns, M. & Gupta, G. (2020). Effects of Layer Thickness In Laser-Powder Bed Fusion Properties of 420 Stainless Steel . Rapid Prototyping Journal , 57, 1197-1208
- Atre, S., V., Nath, S., Gulsoy, O., Kearns, M. & Gupta, G. (2020). Effects of Layer Thickness In Laser-Powder Bed Fusion Properties of 420 Stainless Steel . Rapid Prototyping Journal , 57, 1197-1208
- Atre, S., V., Nath, S., Malshe, A., Bapat, S. & Tiner, C. (2020). Understanding Biologicalisation of Snake-Skin Inspired Textures Through Additive Manufacturing for Mechanical Traction . CIRP Annals , 69, 201-204
- Buxani, M., Irrinki, H., Nath, S., D., Gerber, E., Stitzel, J., Gatsche, M., Ballaro, J., Vallury, S., Baker, A. & Atre, S. (2019). EVALUATION OF LASER-BEAM POWDER-BED-FUSION FABRICATED MOLDS FOR INJECTION MOLDING. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 55(2), 51--63
- Chinn, R., E., Enneti, R., K., Kate, K., H. & Atre, S., V. (2019). Kinetics of thermal dewaxing of injection-molded silicon carbide. International Journal of Ceramic Engineering & Science, 1(2), 85--91
- Deshpande, A., Nath, S., Atre, S., V. & Hsu, K., H. (2020). Effect of Post Processing Heat Treatment Routes on Microstructure and Mechanical Property Evolution of Haynes 282 Ni-Based Superalloy Fabricated with Selective Laser Melting (SLM) . Metals , 10, 629-641
- Enneti, R., K., Bothara, M., G., Park, S. & Atre, S., V. (2012). Development of master sintering curve for field-assisted sintering of HfB2--20SiC. Ceramics International, 38(5), 4369--4372
- Enneti, R., K., Park, S., J., German, R., M. & Atre, S., V. (2012). Thermal debinding process in particulate materials processing. Materials and Manufacturing Processes, 27(2), 103--118
- Enneti, R., K., Park, S., Schenck, A., German, R., M., Thomas, P., Levenfeld, B., V'arez, A., Souza, I., Souza, J., P., Fuentefria, A., M. & others, . (2012). CRITICAL ISSUES IN MANUFACTURING DENTAL BRACKETS BY POWDER INJECTION MOLDING.. International Journal of Powder Metallurgy, 48(2)
- German, R., M., Atre, S., V. & Thomas, J. (2002). Large, low-production quantity components via polymer-assisted shaping and sintering technologies. P/M Science & Technology Briefs, 4(1), 9--13
- Irrinki, H., Nath, S., D., Alhofors, M., Stitzel, J., Gulsoy, O. & Atre, S., V. (2019). Microstructures, properties, and applications of laser sintered 17-4PH stainless steel. Journal of the American Ceramic Society, 102(9), 5679--5690
- Martin, R., Vick, M., Enneti, R., K. & Atre, S., V. (2015). Sintering characteristics of a powder injection molded ceria-stabilized zirconia--mullite composite. Materials and Manufacturing Processes, 30(5), 616--623
- Nath, S., D., Clinning, E., Gupta, G., Wuelfrath-Poirier, V., L’Esp'erance, G., Gulsoy, O., Kearns, M. & Atre, S., V. (2019). Effects of Nb and Mo on the microstructure and properties of 420 stainless steel processed by laser-powder bed fusion. Additive Manufacturing, 28, 682--691
- Nath, S., D., Irrinki, H., Gupta, G., Kearns, M., Gulsoy, O. & Atre, S. (2019). Microstructure-property relationships of 420 stainless steel fabricated by laser-powder bed fusion. Powder Technology, 343, 738--746
- Nath, S., Okello, A., Kelkar, R., Kearns, M. & Atre, S., V. (2021). Adapting L-PBF Process for Fine Powders: A Case Study in 420 Stainless Steel. Materials and Manufacturing Processes
- Noorani, S., Simonsen, J. & Atre, S. (2007). Nano-enabled microtechnology: polysulfone nanocomposites incorporating cellulose nanocrystals. Cellulose, 14(6), 577--584
- Onbattuvelli, V., Balla, V., Enneti, R., Kate, K., H., Simonsen, J. & Atre, S., V. (2020). Metal Matrix Composites for Fabricating Tooling . International Journal of Refractory Metals and Hard Materials , 87, 105169
- Onbattuvelli, V., Enneti, R., K., Sohn, S., McCabe, T., Park, S. & Atre, S. (2011). Micro-powder injection moulding of barium titanate. Powder Injection Moulding International, 5(4), 59--65
- Onbattuvelli, V., P., Enneti, R., K. & Atre, S., V. (2012). The effects of nanoparticle addition on the sintering and properties of bimodal AlN. Ceramics International, 38(8), 6495--6499
- Onbattuvelli, V., P., Enneti, R., K., Park, S. & Atre, S., V. (2013). The effects of nanoparticle addition on SiC and AlN powder--polymer mixtures: Packing and flow behavior. International Journal of refractory metals and hard materials, 36, 183--190
- Onbattuvelli, V., P., Enneti, R., K., Simonsen, J., Kate, K., H., Balla, V., K. & Atre, S., V. (2020). Structure and thermal stability of cellulose nanocrystal/polysulfone nanocomposites. Materials Today Communications, 22, 100797
- Onler, R., Atre, S., V. & Burak Ozdoganlar, O. (2019). Forces in Green Micromachining of Ceramics: An Experimental Investigation on Micromachining of Aluminum Nitride. Journal of Micro and Nano-Manufacturing, 7(2)
- Onler, R., Korkmaz, E., Kate, K., Chinn, R., E., Atre, S., V. & Ozdoganlar, O., B. (2019). Green micromachining of ceramics using tungsten carbide micro-endmills. Journal of Materials Processing Technology, 267, 268--279
- Parikh, A., N., Liedberg, B., O., Atre, S., V., Ho, M. & Allara, D., L. (1995). Correlation of molecular organization and substrate wettability in the self-assembly of n-alkylsiloxane monolayers. The Journal of Physical Chemistry, 99(24), 9996--10008
- Park, J., M., Han, J., S., Gal, C., W., Oh, J., W., Lin, D., Noh, J., Kate, K., H., Atre, S., V., Kim, Y. & Park, S., J. (2019). Thermal decomposition behavior and modeling of PMN-PZT ceramic feedstock with varying binder compositions. Materials Research Express, 6(6), 065316
- Pease, L., F., Atre, S., V. & Thomas, J. (1998). Powder metallurgy methods for rapid prototyping. ASM Handbook, 7, 426--436
- Seshadri, K., Atre, S., V., Tao, Y., Lee, M. & Allara, D., L. (1997). Synthesis of Crystalline, Nanometer-Scale,-(CH2) x- Clusters and Films on Gold Surfaces. Journal of the American Chemical Society, 119(20), 4698--4711
- Simonsen, J., Noorani, S. & Atre, S. (2005). Cellulose/polysulfone nanocomposites.. ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 229
- Singh, P., Gokce, A., Balla, V., Atre, S., V. & Kate, K., H. (2021). Additive Manufacturing of Ti-6Al-4V Alloy by Metal Fused Filament Fabrication (MF3): Producing Parts Comparable to Metal Injection Molding. Progress in Additive Manufacturing, 1-14
- Singh, P., Shaikh, Q., Balla, V., Atre, S., V. & Kate, K., H. (2020). Printability Studies of Ti-6Al-4V by Metal Fused Filament Fabrication (MF3) . International Journal of Refractory Metals and Hard Materials , 91, 105249
- Singh, P., Shaikh, Q., Balla, V., K., Atre, S., V. & Kate, K., H. (2020). Estimating Powder-Polymer Material Properties Used in Design for Metal Fused Filament Fabrication (DfMF 3). JOM, 72(1), 485--495
- Stranick, S., J., Atre, S., V., Parikh, A., N., Wood, M., C., Allara, D., L., Winograd, N. & Weiss, P., S. (1996). Nanometer-scale phase separation in mixed composition self-assembled monolayers. Nanotechnology, 7(4), 438
- Tidwell, C., D., Ertel, S., I., Ratner, B., D., Tarasevich, B., J., Atre, S. & Allara, D., L. (1997). Endothelial cell growth and protein adsorption on terminally functionalized, self-assembled monolayers of alkanethiolates on gold. Langmuir, 13(13), 3404--3413
- Tiner, C., Bapat, S., Nath, S., D., Atre, S., V. & Malshe, A. (2019). Exploring Convergence of Snake-Skin-Inspired Texture Designs and Additive Manufacturing for Mechanical Traction. Procedia Manufacturing, 34, 640--646
- Togwe, T., Atre, S., V., Thomas, J., A., Kuhar, A., J., Joys, J. & German, R., M. (2000). Production tooling from powder metallurgy: Opportunities and limitations. SAE transactions, 1022--1028
- Togwe, T., Atre, S., V., Thomas, J., A., Myers, N. & German, R., M. (2002). A Generic Hard Metal Tooling Based On. Proceedings of the 2002 International Conference on Metal Powder Deposition for Rapid Manufacturing
- Togwe, T., G"okc{c}e, A., Chen, Y., German, R., M. & Atre, S. (2020). Metal matrix composites for fabricating tooling. International Journal of Refractory Metals and Hard Materials, 87, 105169
- Tour, J., M., Jones, L., Pearson, D., L., Lamba, J., J., Burgin, T., P., Whitesides, G., M., Allara, D., L., Parikh, A., N. & Atre, S. (1995). Self-assembled monolayers and multilayers of conjugated thiols,. alpha.,. omega.-dithiols, and thioacetyl-containing adsorbates. Understanding attachments between potential molecular wires and gold surfaces. Journal of the American Chemical Society, 117(37), 9529--9534
- Weaver, T., J., Thomas, J., A., Atre, S., V. & German, R., M. (2000). Time compression-rapid steel tooling for an ever-changing world. Materials & Design, 21(4), 409--415
- Yang, M., Atre, S., V. & German, R., M. (1996). Wax-based and PEG-based binder system development for metal and ceramic powders. Advances in Powder Metallurgy and Particulate Materials, 5, 19--225
- Yemisci, I., Mutlu, O., Gulsoy, N., Kunal, K., Atre, S. & Gulsoy, H., O. (2019). Experimentation and analysis of powder injection molded Ti10Nb10Zr alloy: a promising candidate for electrochemical and biomedical application. Journal of Materials Research and Technology, 8(6), 5233--5245
More about Sundar Atre
2023
Spring
- ME 575 - SPECIAL TOPICS IN ME
- ME 575 - SPECIAL TOPICS IN ME
2022
Spring
- ME 575 - SPECIAL TOPICS IN ME
- ME 575 - SPECIAL TOPICS IN ME
Fall
- ME 575 - SPECIAL TOPICS IN ME
- ME 575 - SPECIAL TOPICS IN ME
2021
Spring
- ME 381 - INTRO TO MANUFACTURING
- ME 381 - INTRO TO MANUFACTURING
Fall
- ME 575 - SPECIAL TOPICS IN ME
- ME 688 - IND STUDY MECH ENGR
2020
Spring
- ME 575 - SPECIAL TOPICS IN ME
Summer
- ME 575 - SPECIAL TOPICS IN ME
Fall
- ME 575 - SPECIAL TOPICS IN ME
2019
Spring
- ME 575 - SPECIAL TOPICS IN ME
- ME 588 - IND STUDY IN MECH ENGR
Fall
- ME 575 - SPECIAL TOPICS IN ME
Summer
- ME 575 - SPECIAL TOPICS IN ME
- ME 588 - IND STUDY IN MECH ENGR
- ME 688 - IND STUDY MECH ENGR
2018
Spring
- ME 575 - SPECIAL TOPICS IN ME
Fall
- ME 575 - SPECIAL TOPICS IN ME
Summer
- ME 588 - IND STUDY IN MECH ENGR
2017
Spring
- ME 497 - CAPSTONE DESIGN PROJECT;CUE
- ME 588 - IND STUDY IN MECH ENGR
Fall
- ME 588 - IND STUDY IN MECH ENGR
- ME 688 - IND STUDY MECH ENGR
2016
Fall
- ME 497 - CAPSTONE DESIGN PROJECT;CUE
- ME 575 - SPECIAL TOPICS IN ME
Spring
- ME 575 - SPECIAL TOPICS IN ME
- ME 688 - IND STUDY MECH ENGR
- ME 688 - IND STUDY MECH ENGR
Summer
- ME 688 - IND STUDY MECH ENGR
Sundar Atre
Professor, Endowed Chair-Manufacturing & Materials Mechanical Engineering
Shumaker Research Building 214
Louisville, Kentucky 40208