2017 Publications

Journal Articles
Abdelrahman, M., Reutzel, E. W., Nassar, A. R., and Starr, T. L. (2017). “Flaw detection in powder bed fusion using optical imaging.” Additive Manufacturing, 15, 1-11.
Adhikari, S. P., Hood, Z. D., Wang, H., Peng, R., Krall, A., Li, H., Chen, V. W., More, K. L., Wu, Z., Geyer, S., and Lachgar, A. (2017). “Enhanced visible light photocatalytic water reduction from a g-C3N4/SrTa2O6 heterojunction.” Applied Catalysis B-environmental, 217, 448-458.
Ajayi, B. P., Thapa, A. K., Cvelbar, U., Jasinski, J. B., and Sunkara, M. K. (2017). “Atmospheric plasma spray pyrolysis of lithiated nickel-manganese-cobalt oxides for cathodes in lithium ion batteries.” Chemical Engineering Science, 174, 302-310.
Akhtar, M., Anderson, G., Zhao, R., Alruqi, A., Mroczkowska, J. E., Sumanasekera, G., and Jasinski, J. B. (2017). “Recent advances in synthesis, properties, and applications of phosphorene.” npj 2D Materials and Applications, 1(1), 5.
Al Salti, F., Alzeidi, N., Arafeh, B., and Al Salti, F. (2017). “EMGGR: an energy-efficient multipath grid-based geographic routing protocol for underwater wireless sensor networks.” Wireless Networks, 23(4), 1301-1314.
Allen, D. J., Accolla, R. P., and Williams, S. J. (2017). “Isomotive dielectrophoresis (isoDEP) for parallel analysis of individual particles.” Electrophoresis, 38, 1441-1449.
Al-Salti, F., N, A., Day, K., Arafeh, B., and Touzene, A. (2017). “Grid Based Priority Routing Protocol for UWSNs.” International journal of Computer Networks & Communications, 9(6), 1-20.
Aniagyei, S. E., Sims, L. B., Malik, D. A., Tyo, K. M., Curry, K. C., Kim, W., Hodge, D. A., Duan, J., and Steinbach-Rankins, J. M. (2017). “Evaluation of poly(lactic-co-glycolic acid) and poly(dl-lactide-co-ε-caprolactone) electrospun fibers for the treatment of HSV-2 infection.” Materials Science and Engineering: C, 72, 238-251.
Ankireddy, K., Druffel, T., Vunnam, S., Filipic, G., Dharmadasa, R., and Amos, D. A. (2017). “Seed Mediated Copper Nanoparticle Synthesis for Fabricating Oxidation Free Interdigitated Electrodes using Intense Pulse Light Sintering for Flexible Printed Chemical Sensors.” Journal of Materials Chemistry C, 5, 11128-11137.
Antimisiaris, D., Bae, K.-H., Morton, L., and Zahara, G. (2017). “Tamoxifen Pharmacovigilance: Implications for Safe Use in the Future.” The Consultant Pharmacist, 32(9), 535-546.
Arabmakki, E., and Kantardzic, M. M. (2017). “SOM-based partial labeling of imbalanced data stream.” Neurocomputing, 262, 120-133.
Araki, T., Jain, P., Suri, H., Londhe, N., Ikeda, N., El-Baz, A., Shrivastava, V., Saba, L., Nicolaides, A., Shafique, S., Laird, J., and Gupta, A. (2017). “Stroke Risk Stratification and Its Validation using Ultrasonic Echolucent Carotid Wall Plaque Morphology: A Machine Learning Paradigm.” Computers in Biology and Medicine, 80, 77-96.
Arutt, C. N., Alles, M., Liao, w., Gong, H., Davidson, J., Schrimpf, R., Reed, R., Weller, R., Bolotin, K., Nicholl, R., Pham, T., Zettl, A., Du, Q., Hu, J., Li, M., Alphenaar, B. W., Lin, J.-T., Shuvra, P. D., McNamara, S., Walsh, K. M., Feng, P., Homeijer, B., Palcawich, R., Proie, R., Jones, J., Glaser, E., Cress, C., and Bassiri-Gharb, N. (2017). “The Study of Radiation Effects in Emerging Micro and Nano Electro Mechanical Systems (M and NEMs).” Semiconductor Science and Technology, 32(1), 13005.
Arutt, C. N., Liao, W., Gong, H., Shuvra, P. D., Lin, J. T., Alles, M., Alphenaar, B. W., Davidson, J., Walsh, K. M., McNamara, S., Zhang, E. X., Sternberg, A., Fleetwood, D., Reed, R., and Schrimpf, R. (2017). “Dose-Rate Effects on the Total-Ionizing-Dose Response of Piezoresistive Micromachined Cantilevers.” IEEE Transactions on Nuclear Science.
Ayinde, B. O., and Zurada, J. M. (2017). “Discovery Through Constraints: Imposing Constraints on Autoencoders for Data Representation and Dictionary Learning.” IEEE Systems, Man, and Cybernetics Magazine, 3(3), 13-24.
Ayinde, B. O., and Zurada, J. M. (2017). “Nonredundant sparse feature extraction using autoencoders with receptive fields clustering.” Neural Networks, 93, 99-109.
Bae, K.-H., Jones, M., Evans, G. W., and Antimisiaris, D. (2017). “Simulation Modeling of Patient Flow and Capacity Planning for Regional Long-Term Care Needs.” Health Systems, 1-16.
Bamji, S. F., Rouchka, E. C., Zhang, Y., Li , X., Kalbfleisch, T., and Corbitt, C. (2017). “Next generation sequencing analysis of soy glyceollins and 17-ß estradiol: Effects on transcript abundance in the female mouse brain.” Molecular and cellular endocrinology, S0303-7207(17), 30255-30251.
Banjanovic-Mehmedovic, L., Hajdarevic, A., Kantardzic, M. M., Mehmedovic, F., and Dzananovic, I. (2017). “Neural network-based data-driven modelling of anomaly detection in thermal power plant.” Automatika, 58(1), 69-79.
Bates, A., Zickel, B., Krebs, S., Mukherjee, S., Schuppert, N., Choi, M. J., and Park, S. D. (2017). “Analytical Study and Experimental Validation of Copper II Sulfate and Potassium Ferri/Ferrocyanide Thermocells Using Onsager Flux Equations.” Journal of Energy Resource Technology, 139(4), 12.
Baum, S. D., Barrett, A. M., and Yampolskiy, R. V. (2017). “Modeling and Interpreting Expert Disagreement About Artificial Superintelligence.” Informatica, 41(7), 419-428.
Berg, M., Keyshar, K., Bilgin, I., Liu, F., Yamaguchi, H., Vajtai, R., Chan, C., Gupta, G., Kar, S., Ajayan, P., Ohta, T., and Mohite, A. D. (2017). “Layer dependence of the electronic band alignment of few-layer MoS2 on SiO2 measured using photoemission electron microscopy.” PHYSICAL REVIEW B, 95(23), 235406.
Bertocci, G. E., Thompson, A. K., and Pierce, M. C. (2017). “Comparison of femur fracture morphology and biomechanics under torsion and bending loads in an in vitro immature porcine model.” Journal of Forensic and Legal Medicine, 52, 5-11.
Bhutiani, N., Kimbrough, C., Burton, N., Morscher, S., Egger, M., McMasters, K., El-Baz, A., and McNally, L. (2017). “Detection of microspheres in vivo using Multispectral Optoacoustic Tomography.” Biotechnic & Histochemistry, 92(1), 1-6.
Burke, C., Zoeller, K., Waddell, S., Nyland, J., Voor, M. J., and Gupta, A. (2017). “Assessment of Distal Radioulnar Joint Stability After Reconstruction With the Brachioradialis Wrap.” Hand.
Cao, C., Li, H., Hu, Z., and Zeng, H. (2017). “One-bit Transceiver Cluster for Relay Transmission.” IEEE Communications Letters, 21(4), 925–928.
Cao, S., Gentili, M., Griffin, P. M., Griffin, S. O., Harati, P., Johnson, B., Serban, N., and Tomar, S. (2017). “Estimating Demand for and Supply of Pediatric Preventive Dental Care for Children and Identifying Dental Care Shortage Areas, Georgia, 2015.” Public Health Reports, 132(3), 343-349.
Cao, S., Gentili, M., Griffin, P. M., Griffin, S. O., and Serban, N. (2017). “Disparities in Preventive Dental Care Among Children in Georgia.” Preventing Chronic Disease, 14, 170-176.
Carnahan, S., Koenig, S. C., Sobieski, M. A., Schumer, E., Monreal, G., Wang, Y., Choi, Y., Tompkins, L. H., Wu, Z. J., Slaughter, M. S., and Giridharan, G. A. (2017). “Efficacy of subcutaneous electrocardiogram leads for synchronous timing during chronic counterpulsation therapy.” ASAIO journal, 63(2), 134-138.
Çeven, E., and Gue, K. R. (2017). “Optimal Wave Release Times for Order Fulfillment Systems with Deadlines.” Transportation Science, 55(1), 52–66.
Chariker, J. H., Zhang, Y., Pani, J. R., and Rouchka, E. C. (2017). “Identification of successful mentoring communities using network-based analysis of mentor-mentee relationships across Nobel laureates.” Scientometrics, 111(3), 1733-1749.
Davis, D., Logsdon, C., Vogt, K., Rushton, J., Myers, J., Lauf, A. P., and Hogan, F. (2017). “Parent Education is Changing: A Review of Smartphone Apps.” MCN: The American Journal of Maternal/Child Nursing, 42(5), 248-256.
Day, K., Touzene, A., Arafeh, B., and Alzeidi, N. (2017). “GARP : A Highly Reliable Grid Based Adaptive Routing Protocol for Underwater Wireless Sensor Networks.” International journal of Computer Networks & Communications, 9(5), 71-82.
DeFilippis, A. P., Trainor, P. J., Hill, B. G., Amraotkar, A. R., Rai, S. N., Hirsch, G. A., Rouchka, E. C., and Bhatnagar, A. (2017). “Identification of a plasma metabolomic signature of thrombotic myocardial infarction that is distinct from non-thrombotic myocardial infarction and stable coronary artery disease.” PLoS One, 12(4), e0175591.
Derhami, S., Smith, J. S., and Gue, K. R. (2017). “Optimizing Space Utilization for Block Stacking Warehouses.” International Journal of Production Research, 55(21), 6436–6452.
Dharmadasa, I., Madugu, M., Olusola, O., Echendu, O., Fauzi, F., Diso, D., Weerasinghe, A., Druffel, T., Dharmadasa, R., Lavery, B., Jasinski, J., Krentsel, T., and Sumanasekera, G. (2017). “Electroplating of CdTe Thin Films from Cadmium Sulphate Precursor and Comparison of Layers Grown by 3-Electrode and 2-Electrode Systems.” Coatings, 7(2), 17.
Dilip, J. J. S., Miyanaji, H., Lassell, A., Starr, T. L., and Stucker, B. (2017). “A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing.” Defence Technology, 13(2), 72-76.
Dilip, J. J. S., Ram, G. D. J., Starr, T. L., and Stucker, B. (2017). “Selective laser melting of HY100 steel: Process parameters, microstructure and mechanical properties.” Additive Manufacturing, 13, 49-60.
Dilip, S., Miyanaji, H., Lassell, A., Starr, T. L., and Stucker, B. E. (2017). “A novel method to fabricate TiAl intermetallic alloy 3D parts using additive manufacturing.” Defence Technology, 13(2), 72-76.
Dilip, S., Ram, J., Starr, T. L., and Stucker, B. E. (2017). “Selective laser melting of HY100 steel: Process parameters, microstructure and mechanical properties.” Additive Manufacturing, 13, 49-60.
Doggett, A., Weiler, D., and Saleem, J. J. (2017). “Variations in the usability of independent Web-based personal health records.” International Journal of Human-Computer Interaction, 33(4), 280-286.
Ebrahimi, M., Gerber, E., and Rockaway, T. D. (2017). “Temporal performance assessment of wastewater treatment plants by using multivariate statistical analysis.” Journal of Environmental Management, 193, 234-246.
Ebrahimi, M., Kazemi, H., Mirbagheri, S. A., and Rockaway, T. D. (2017). “An Integrated Approach to Treatment of High Strength Organic Wastewater by using Anaerobic Rotating Biological Contactor.” Journal of Environmental Engineering, 144(2).
Eladawi, N., Elmogy, M., Helmy, O., Aboelfetouh, A., Riad, A., Sandhu, H., Schaal, S., and El-Baz, A. (2017). “Automatic blood vessels segmentation based on different retinal maps from OCTA scans.” Computers in Biology and Medicine, 89, 150-161.
Elizabeth, H., Mohamed, S., Mohamed, A. E.-G., Mohammed, G., Tarek, E.-D., Michael, M., E, S. A., and Ayman, E.-B. (2017). “Statistical analysis of ADCs and clinical biomarkers in detecting acute renal transplant rejection.” The British Journal of Radiology, 90(1080), 20170125.
Farhangi, M. M., Frigui, H., Seow, A., and Amini, A. A. (2017). “3D Active Contour Segmentation Based on Sparse Linear Combination of Training Shapes (SCoTS).” IEEE Trans. On Medical Imaging, 36(11), 2239-2249.
Fried, J. R., Dubbs, T., and Martin, M. (2017). “Planar Bilayer Measurements of Alamethicin and Gramicidin Reconstituted in Biomimetic Block Copolymers.” Langmuir, 33(5), 1171-1179.
Garcia-Zapirain, B., Shalaby, A., El-Baz, A. S., and Elmaghraby, A. S. (2017). “Automated framework for accurate segmentation of pressure ulcer images.” Computers in biology and medicine, 90, 137-145.
Gentili, M., Harati, P., Serban, N., O’Connor, J., and Swann, J. (2017). “Quantifying Disparities in Accessibility and Availability of Pediatric Primary Care across Multiple States with Implications for Targeted Interventions.” Health Services Research.
Ghavami, M., Zhao, Q., Javadi, S., Jangam, J. S. D., Jasinski, J. B., and Saraei, N. (2017). “Change of organobentonite interlayer microstructure induced by sorption of aromatic and petroleum hydrocarbons—A combined study of laboratory characterization and molecular dynamics simulations.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 520, 324-334.
Gong, H., Liao, W., Zhang, E. X., Sternberg, A., McCurdy, M., Davidson, J., Reed, R., Fleetwood, D., Schrimpf, R., Shuvra, P. D., Lin, J. T., McNamara, S., Walsh, K. M., Alphenaar, B. W., and Alles, M. (2017). “Proton-Induced Displacement Damage and Total-Ionizing-Dose Effects on Silicon-Based MEMS Resonators.” IEEE Transactions on Nuclear Science, 65(1), 34-38.
Gong, H., Liao, W., Zhang, E. X., Sternberg, A., McCurdy, M., Davidson, J., Reed, R., Fleetwood, D., Schrimpf, R., Shuvra, P. D., Lin, J. T., McNamara, S., Walsh, K. M., Alphenaar, B. W., and Alles, M. (2017). “Total-Ionizing-Dose Effects in Piezoresistive Micromachined Cantilevers.” IEEE Transactions on Nuclear Science, 64(1), 263-268.
Gue, K. R., Smith, A., and Ozden, G. (2017). “Solving Large Batches of Traveling Salesman Problems with Parallel and Distributed Computing.” Computers and Operations Research, 85, 87-96.
Gupta, G. (2017). “MoS2 Decorated Carbon Nanofibers as Efficient and Durable Electrocatalyst for Hydrogen Evolution Reaction.” Journal of Carbon Research, 3(4), 33.
Gupta, G., Keyshar, K., Berg, M., Zhang, X., Vajtai, R., Chan, C. K., Beechem, T. E., Ajayan, P. M., Mohite, A. D., and Ohta, T. (2017). “Experimental Determination of the Ionization Energies of MoSe2, WS2, and MoS2 on SiO2 Using Photoemission Electron Microscopy.” ACS NANO, 11(8), 8223-8230.
Gupta, G., Liu, F., Moody, N. A., Jensen, K. L., Pavlenko, V., Villarrubia, C. W. N., and Mohite, A. D. (2017). “Single layer graphene protective gas barrier for copper photocathodes.” Applied Physics Letters, 110(4).
Gupta, G., Tsai, H., Nie, W., Lin, Y.-H., Blancon, J. C., Tretiak, S., Even, J., Ajayan, P. M., and Mohite, A. D. (2017). “Effect of Precursor Solution Aging on the Crystallinity and Photovoltaic Performance of Perovskite Solar Cells.” Advanced Energy Materials, 7(11), 1602159.
Gupta, G., Zequine, C., Ranaweera, C. K., Wang, Z., Dvornic, P. R., Kahol, P. K., Singh, S., Tripathi, P., Srivastava, O. N., Singh, S., Gupta, B. K., and Gupta, R. K. (2017). “High-Performance Flexible Supercapacitors obtained via Recycled Jute: Bio-Waste to Energy Storage Approach.” Scientific Reports, 7, 1174.
Gupta, G., Zhang, J., Wu, J., Guo, H., Chen, W., Yuan, J., Martinez, U., Mohite, A., Ajayan, P. M., and Lou, J. (2017). “Unveiling Active Sites for the Hydrogen Evolution Reaction on Monolayer MoS2.” Advanced Materials, 29(42), 1701955.
Gupta, S., Carrizosa, S. B., McDonald, B., Jasinski, J., and Dimakis, N. (2017). “Graphene-family nanomaterials assembled with cobalt oxides and cobalt nanoparticles as hybrid supercapacitive electrodes and enzymeless glucose detection platforms.” Journal of Materials Research, 32(2), 301-322.
Harnett, C., Zhao, H., and Shepherd, R. F. (2017). “Stretchable Optical Fibers: Threads for Strain-Sensitive Textiles.” Advanced Materials Technologies.
Harris, B., Tomes, E., and Altiparmak, N. (2017). “Towards Energy Efficient Cloud Data Centers.” IEEE Transactions on Cloud Computing, 29(2), 56 – 61.
Hollis, E., Shehata, M., Khalifa, F., Abou El-Ghar, M., El-Diasty, T., and El-Baz, A. (2017). “Towards non-invasive diagnostic techniques for early detection of acute renal transplant rejection: A review.” The Egyptian Journal of Radiology and Nuclear Medicine, 48(1), 257-269.
Hou, Y., Ong, Y. S., Feng, L., and Zurada, J. M. (2017). “An Evolutionary Transfer Reinforcement Learning Framework for Multiagent Systems.” IEEE Transactions on Evolutionary Computation, 21(4), 601-615.
Hudson, S., Dolin, C., Poole, L., Massey, V., Wilkey, D., Beier, J., Merchant, M., Frieboes, H. B., and Arteel, G. (2017). “Modeling the Kinetics of Integrin Receptor Binding to Hepatic Extracellular Matrix Proteins.” Scientific Reports, 7, 12444.
Imani, F., and Bae, K.-H. (2017). “Preventive Maintenance Modeling in Lifetime Warranty.” International Journal of Quality Engineering and Technology, 6(4), 1.
Ismail, M., Soliman, A., Ghazal, M., Switala, A. E., Gimel’farb, G., Barnes, G. N., Khalil, A., and El-Baz, A. (2017). “A fast stochastic framework for automatic MR brain images segmentation.” PLOS ONE, 12(11), e0187391.
Jala, V. R., Maturu, P., Bodduluri, S. R., Krishnan, E., Mathis, S., Subbarao, K., Wang, M., Proctor, M. L., Rouchka, E. C., Knight, R., and Haribabu, B. (2017). “Leukotriene B4-receptor-1 mediated host response shapes gut microbiota and controls colon tumor progression.” Oncoimmunology, 6(12), e1361693.
Jasper, W. J., and Rasipuram, S. (2017). “Relationship between contact angle and contact line radius for micro to atto [10-6 to 10-18] liter size oil droplets.” Journal of Molecular Liquids, 248, 920–926.
Jokinen, T. A., and McNamara, S. (2017). “Band-to-Band Tunneling Diode for Ultralow-Voltage Applications.” IEEE Transactions on Electron Devices, 64(6), 2702-2706.
Jung, S., Chang, D.-J., and Park, J. W. (2017). “Large scale document inversion using a multi-threaded computing system.” ACM SIGAPP Applied Computing Review, 17(2), 27-35.
Kalia, P., Jain, A., Radha Krishnan, R., Demuth, D. R., and Steinbach-Rankins, J. M. (2017). “Peptide-modified nanoparticles inhibit formation of Porphyromonas gingivalis biofilms with Streptococcus gordonii.” International journal of nanomedicine, 12, 4553-4562.
Kamal, C. S., Rao, T. K. V., Samuel, T., Reddy, P. V. S. S. S. N., Jasinski, J. B., Ramakrishna, Y., Rao, M. C., and Rao, K. R. (2017). “Blue to magenta tunable luminescence from LaGaO3: Bi3+, Cr3+ doped phosphors for field emission display applications.” Rsc Adv, 7(71), 44915-44922.
Kamal, C. S., Visweswara Rao, T. K., Reddy, P. V. S. S. S. N., Sujatha, K., Ajayi, B. P., Jasinski, J. B., and Rao, K. R. (2017). “Unravelling the energy transfer mechanism in bismuth co-activation of LaInO3:Sm3+/Ho3+ nanophosphor for color-tunable luminescence.” Rsc Adv, 7(16), 9724-9731.
Kate , K. H., Enneti, R., and Atre, S. V. (2017). “Influence of feedstock properties on the injection molding of aluminum nitride.” The International Journal of Advanced Manufacturing Technology, 90(9-12), 2813-2826.
Kazemi, H., Rockaway, T. D., Rivard, J., and Abdollahian, S. (2017). “Assessment of Surface Infiltration Performance and Maintenance of Two Permeable Pavement Systems in Louisville, Kentucky.” Journal of Sustainable Water in the Built Environment, 3(4), 04017009.
Khalifa, F., Soliman, A., Elmaghraby, A. S., Gimel’farb, G., and El-Baz, A. (2017). “3D Kidney Segmentation from Abdominal Images Using Spatial-Appearance Models.” Computational and Mathematical Methods in Medicine, Special issue: Machine Learning Applications in Medical Image Analysis (MLAA), 2017, 1-10.
Khodabandeh, E., Bai, L., Heragu, S. S., Evans, G. W., Elrod, T., and Shirkness, M. (2017). “Modelling and solution of a large-scale vehicle routing problem at GE appliances & lighting.” International Journal of Production Research, 55(4), 1100-1116.
Kim, Y. H., Park, Y., and Bai, J.-W. (2017). “Probabilistic Shear Capacity Models for Concrete Members with Internal Composite Reinforcement.” Journal of Composites for Construction, 21(2), 04016083.
Kumar, B., Atla, V., Brian, J. P., Kumari, S., Nguyen, T. Q., Sunkara, M., and Spurgeon, J. M. (2017). “Reduced SnO2 Porous Nanowires with a High Density of Grain Boundaries as Catalysts for Efficient Electrochemical CO2-into-HCOOH Conversion.” Angewandte Chemie International Edition, 56(13), 3645-3649.
Kumari, S., Ajayi, B. P., Kumar, B., Jasinski, J. B., Sunkara, M. K., and Spurgeon, J. M. (2017). “A low-noble-metal W1-xIrxO3-[small delta] water oxidation electrocatalyst for acidic media via rapid plasma synthesis.” Energy & Environmental Science, 10(11), 2432-2440.
Lee, J., Bae, K.-H., and Younos, T. (2017). “Conceptual Framework for Decentralized Green Water-Infrastructure Systems.” Water and Environment Journal.
Leonard, F., Curtis, L. T., Ware, M. J., Nosrat, T., Liu, X., Yokoi, K., Frieboes, H. B., and Godin, B. (2017). “Macrophage Polarization Contributes to the Anti-Tumoral Efficacy of Mesoporous Nanovectors Loaded with Albumin-Bound Paclitaxel.” Frontiers in Immunology, 8(693).
Li, F., Zurada, J. M., Liu, Y., and Wu, W. (2017). “Input Layer Regularization of Multilayer Feedforward Neural Networks.” IEEE Access, 5, 10979-10985.
Li, w., Luo, Z., Sun, Z., Hu, Y., and Duan, H. (2017). “Numerical Modelling of plastic-damage response and crack propagation in RAC under uniaxial loading.” Magazine of Concrete Research, 69(21), 1-14.
Li, W., Sun, Z., Luo, Z., and Shah, S. P. (2017). “Influence of Relative Mechanical Strengths between New and Old Cement Mortars on the Crack Propagation of Recycled Aggregate Concrete.” JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 15(3), 110-125.
Li , X., Brock, G. N., Rouchka, E. C., Cooper NGF, Wu, D., OToole, T. E., Gill, R. S., Eteleeb, A. M., OBrien, L., and Rai, S. N. (2017). “A comparison of per sample global scaling and per gene normalization methods for differential expression analysis of RNA-seq data.” PloS one, 12(5), e0176185.
Li, X., Cooper, N. G., Shyr, Y., Wu, D., Rouchka, E. C., Gill, R. S., OToole, T. E., Brock, G. N., and Rai, S. N. (2017). “Inference and sample size calculations based on statistical tests in a negative binomial distribution for differential gene expression in RNA-seq experimental design.” Journal of Biometrics and Biostatistics, 8, 332.
Li, Y., Luo, C., Zhu, R., Chen, Y., and Zeng, H. (2017). “Efficient Spatial Keyword Query Processing in the Internet of Industrial Vehicles.” Mobile Networks and Applications, 1–15.
Li, Z., Chitturi, M. V., Bill, A. R., and Noyce, D. A. (2017). “Operational Evaluation of Two-Lane Roundabouts at Freeway Ramp Terminals.” Transportation Research Record: Journal of Transportation Research Board, 2637, 99-113.
Li, Z., Chitturi, M. V., Bill, A. R., and Noyce, D. A. (2017). “Operational Evaluation of Two-Lane Roundabouts at Freeway Ramp Terminals.” Transportation Research Record: Journal of the Transportation Research Board, 2637, 99-113.
Lin, D., Sanetrnik, D., Cho, H., Chung, S. T., Kwon, Y. S., Kate , K. H., Hausnerova, B., Atre, S. V., and Park, S. J. (2017). “Rheological and thermal debinding properties of blended elemental Ti-6Al-4V powder injection molding feedstock.” Powder Technology, 311, 357-363.
Lin, J., Zhong, Y., Li, E., Lin, X., and Zhang, H. (2017). “Multi-agent simulated annealing algorithm with parallel adaptive multiple sampling for protein structure prediction in AB off-lattice model.” Elsevier Journal of Applied Soft Computing, 62, 491-503.
Lin, J.-T., Shuvra, P. D., McNamara, S., Gong, H., Liao, W., Davidson, J. L., Walsh, K. M., Alles, M. L., and Alphenaar, B. W. (2017). “Near-Surface Electronic Contribution to Semiconductor Elasticity.” Physical Review Applied, 8(3), 34013.
Lindner, J., Douglas, L., Seligson, D., Waddell, S., and Voor, M. J. (2017). “Orthopaedic anatomy of the sternum: A micro-CT study to guide the fixation of sternal fractures.” Biology, Engineering, and Medicine, 2(2), 4.
Liu, H., Wei, H., Zuo, T., Li, Z., and Yang, Y. J. (2017). “Fine-Tuning ADAS Algorithm Parameters for Optimizing Traffic Safety and Mobility in Connected Vehicle Environment.” Transportation Research Part C: Emerging Technologies, 76, 132-149.
Liu, R., Sun, Z., Ding, Q., Chen, P., and Chen, K. (2017). “Mitigation of Early-Age Cracking of Concrete Based on a New Gel-Type Superabsorbent Polymer.” Journal of Materials in Civil Engineering, 29(10).
Loeian, M. S., Ziolkowska, D. A., Khosravi, F., Jasinski, J. B., and Panchapakesan, B. (2017). “Exfoliated WS 2 -Nafion Composite based Electromechanical Actuators.” Scientific Reports, 7(1), 14599.
Lowrance, C. J., and Lauf, A. P. (2017). “Link Estimation in Robot Networks for Multi-Radio Control and Range Extension.” Journal of Intelligent & Robotic Systems, 85(2), 245-275.
Lowrance, C. J., and Lauf, A. P. (2017). “Link Quality Estimation in Ad Hoc and Mesh Networks: A Survey and Future Directions.” Wireless Personal Communications, 96(1), 475-508.
Lucas, T. M., Porter, D. A., Beharic, J., Berfield, T. A., and Harnett, C. K. (2017). “Bistability in a symmetric out-of-plane microstructure.” Microsystem Technologies, 23(7), 1-8.
Lutz, H., Jaeger, V. W., Bonn, M., Pfaendtner, J., and Weidner, T. (2017). “Acetylation dictates the morphology of nanophase biosilica precipitated by a 14-amino acid leucine-lysine peptide.” Journal of Peptide Science, 23(2), 141-147.
Lutz, H., Jaeger, V. W., Schmueser, L., Bonn, M., Pfaendtner, J., and Weidner, T. (2017). “The Structure of the Diatom Silaffin Peptide R5 within Freestanding Two-Dimensional Biosilica Sheets.” Angewandte Chemie-International Edition, 56(28), 8277-8280.
Lynch, C., Abdollahi, B., Fuqua, J., deCarlo, A., Bartholomai, J., Balgemann, R., van Berkel, V., and Frieboes, H. B. (2017). “Prediction of lung cancer patient survival via supervised machine learning classification techniques.” Int J Medical Informatics, 108, 1-8.
Lynch, C., van Berkel, V., and Frieboes, H. B. (2017). “Application of unsupervised analysis techniques to lung cancer patient data.” PLoS ONE, 12(9), e0184370.
Martin, M., Thompson, A. K., Schuhmann, T. G., Walsh, K. M., and Keynton, R. S. (2017). “MEMS Stabilized Lipid Membranes and Their Parylene Encapsulation.” Journal of Microelectromechanical Systems, 26(3), 662-670.
Mbah, N., Philips, P., Voor, M. J., and Martin, R. (2017). “Optimal radial force and size for palliation in gastroesophageal adenocarcinoma: a comparative analysis of current stent technology.” Surgical Endoscopy, 31(21), 5076-5082.
Mesbah, S., Angeli, C. A., Keynton, R. S., El-Baz, A. S., and Harkema, S. J. (2017). “A novel approach for automatic visualization and activation detection of evoked potentials induced by epidural spinal cord stimulation in individuals with spinal cord injury.” PLoS One, 12(10), 1-21.
Militello, L. G., DiIulio, J. B., Borders, M. R., Sushereba, C. E., Saleem, J. J., Haverkamp, D., and Imperiale, T. F. (2017). “Evaluating a modular decision support application for colorectal cancer screening.” Applied Clinical Informatics, 8(1), 162-179.
Mirinejad, H., Gaweda, A. E., Brier, M. E., Zurada, J. M., and Inanc, T. (2017). “Individualized drug dosing using RBF-Galerkin method: Case of anemia management in chronic kidney disease.” Computer Methods and Programs in Biomedicine, 148, 45-53.
Mirinejad, H., and Inanc, T. (2017). “An RBF Collocation Method for Solving Optimal Control problems.” Robotics and Autonomous Systems, 87, 219-225.
Miyanaji, H., Momenzadeh, N., and Yang, L. (2017). “Effect of printing speed on quality of printed parts in binder jetting process.” Additive Manufacturing, 20, 1-10.
Miyanaji, H., Zhang, S., and Yang, L. (2017). “A physics-based model for equilibrium saturation determination in binder jetting additive manufacturing process.” International Journal of Machine Tools and Manufacture, 124, 1-11.
Mohebbi, M., McIntyre, M. L., and Latham, J. (2017). “Impact Fault Detection for Linear Vapor Compressor Using RISE Observer.” IEEE Transactions on Control Systems Technology, 99, 1-8.
Mondal, N. K., Chen, Z., Chen, H. H., Sorensen, E. N., Pham, S. M., Sobieski, M. A., Koenig, S. C., Slaughter, M. S., Griffith, B. P., and Wu, Z. (2017). “Mechanistic insight of platelet apoptosis leading to non-surgical bleeding among heart failure patients supported by continuous-flow left ventricular assist devices.” Molecular and Cellular Biochemistry, 433(1), 125-137.
Mondal, N. K., Sobieski, M. A., Pham, S. M., Griffith, B. P., Koenig, S. C., Slaughter, M. S., and Wu, Z. J. (2017). “Infection, oxidative stress and changes in circulating regulatory T cells of heart failure patients supported by continuous-flow ventricular assist devices.” ASAIO journal, 63(2), 128-133.
Mukherjee, S., Schuppert, N., Bates, A., Jasinski, J., Hong, J.-E., Choi, M. J., and Park, S. (2017). “An electrochemical and structural study of highly uniform tin oxide nanowires fabricated by a novel, scalable solvoplasma technique as anode material for sodium ion batteries.” Journal of Power Sources, 347, 201-209.
Mukherjee, S., Schuppert, N., Bates, A., Lee, S. C., and Park, S. D. (2017). “Novel mesoporous microspheres of Al and Ni doped LMO spinels and their performance as cathodes in secondary lithium ion batteries.” International Journal of Green Energy, 14(7), 656-664.
Muluhngwi, P., Richardson, K., Napier, J., Rouchka, E. C., Mott, J. L., and Klinge, C. M. (2017). “Regulation of miR-29b-1/a transcription and identification of target mRNAs in CHO-K1 cells.” Molecular and cellular endocrinology, 444, 38-47.
Nadimpalli, V. K., Yang, L., and Nagy, P. (2017). “In-situ interfacial quality assessment of ultrasonic additive manufacturing components using ultrasonic NDE.” NDT and E International, 93, 117-130.
Nambo, A. H., He, J., Atla, V., Nguyen, T. Q., Druffel, T., and Sunkara, M. K. (2017). “Ultrafast carbon dioxide sorption kinetics using lithium silicate nanowires.” Nano Letters, 17(6), 3327-3333.
Ng, C. F., and Frieboes, H. B. (2017). “Model of Vascular Desmoplastic Multispecies Tumor Growth.” J Theor Biology, 430, 245-282.
Ogunwale, M., Chen, Y., Nantz, M. H., Conklin, D., and Fu, X.-A. (2017). “A novel method of nicotine quantification in electronic cigarette liquids and aerosols.” Analytical Methods, 9(29), 4261-4266.
Ogunwale, M., Li, M., Raju, M. V. R., Chen, Y., Nantz, M., and Fu, X. (2017). “Aldehyde detection in electronic cigarette aerosols.” ACS Omega, 2(3), 1207-1214.
Pacheco Chiguano, F. E., and Foreman, J. C. (2017). “Microgrid Reference Methodology for Understanding Utility and Customer Interactions in Microgrid Projects.” The Electricity Journal, 30(3), 44-50.
Paleshi, A., Bae, K.-H., Evans, G. W., and Heragu, S. S. (2017). “A simulation-based optimization approach for mitigation of pandemic influenza.” IISE Transactions on Healthcare Systems Engineering, 7(2), 107-120.
Park, J. W. (2017). “Induction of Immunosuppressive CD8+CD25+FOXP3+ Regulatory T Cells by Suboptimal Stimulation with Staphylococcal Enterotoxin C1.” The Journal of Immunology, 200(2), 669.
Park, J. Y., Moon, B. Y., Park, J. W., Thornton, J. A., and Seo, K. S. (2017). “Genetic engineering of a temperate phage-based delivery system for CRISPR/Cas9 antimicrobials against Staphylococcus aureus.” Scientific Reports, 7, 44929.
Paronyan, T. M., Thapa, A. K., Sherehiy, A., Jasinski, J. B., and Jangam, J. S. D. (2017). “Exceptional Lithium Intercalation Capacity of Incommensurate Graphene Foam in Rechargeable Batteries.” ECS Transactions, 77(11), 311-320.
Paronyan, T. M., Thapa, A. K., Sherehiy, A., Jasinski, J. B., and Jangam, J. S. D. (2017). “Incommensurate Graphene Foam as a High Capacity Lithium Intercalation Anode.” Scientific Reports, 7, 39944.
Paxton, W. F., Ravipati, S., Brooks, M. M., Howell, M., and Davidson, J. L. (2017). “Thermionic Emission from Diamond Films in Molecular Hydrogen Environments.” Frontiers in Mechanical Engineering, 3(18).
Perez-Pimienta, J., Sathitsuksanoh, N., Thompson, V., Tran, K., Ponce-Noyola, T., Stavila, V., Singh, S., and Simmons, B. (2017). “Ternary ionic liquid–water pretreatment systems of an agave bagasse and municipal solid waste blend.” Biotechnology for Biofuels, 10(72).
Porter, D. A., Hoang, T. V., and Berfield, T. A. (2017). “Effects of in-situ poling and process parameters on fused filament fabrication printed PVDF sheet mechanical and electrical properties.” Additive Manufacturing, 13, 81-92.
Qin, X., Zeng, H., Yuan, X., Jalaian, B., Hou, Y. T., Lou, W., and Midkiff, S. F. (2017). “Impact of full duplex scheduling on end-to-end throughput in multi-hop wireless networks.” IEEE Transactions on Mobile Computing, 16(1), 158–171.
Quesada, P. M., and Geiger, J. T. (2017). “Effects of Cognitive Task Execution on Stable and Unstable Surface Balance.” Cogent Engineering, 4(1), 11.
Qureshi, M., Glower, J., Ewert, D., and Koenig, S. C. (2017). “A novel idea to improve cardiac output of mechanical circulatory support devices by optimizing kinetic energy transfer available in forward moving aortic blood flow.” Cardiovascular Engineering and Technology, 2(8), 131-144.
Raiconi, A., Pahl, J., Gentili, M., Voss, S., and Cerulli, R. (2017). “Tactical Production and Lot Size Planning with Lifetime Constraints: A Comparison of Model Formulations.” Asia-Pacific Journal of Operational Research, 34(5).
Ralston, P. A., Tretter, T., and Kendall-Brown, M. (2017). “Implementing Collaborative Learning across the Engineering Curriculum.” Journal of the Scholarship of Teaching and Learning, 17(3), 89-108.
Ramachandra Rao, K., Rajyalakshmi, S., Kamal, C. S., Brahmaji, B., Jasinski, J. B., and Visweswara Rao, T. K. (2017). “Unique optical properties of Eu3+ doped l-histidine hydrochloride mono hydrate single crystals from low temperature growth technique.” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 176, 52-57.
Ranatunga, I., Lewis, F. L., Popa, D. O., and Tousif, S. M. (2017). “Adaptive Admittance Control for Human–Robot Interaction Using Model Reference Design and Adaptive Inverse Filtering.” IEEE Transactions on Control Systems Technology, 25(1), 278-285.
Reda, I., Shalaby, A., Elmogy, M., Elfotouh, A. A., Khalifa, F., El-Ghar, M. A., Hosseini-Asl, E., Gimel’farb, G., Werghi, N., and El-Baz, A. (2017). “A comprehensive non-invasive framework for diagnosing prostate cancer.” Computers in Biology and Medicine, 81, 148-158.
Reichel, D., Curtis, L. T., Ehlman, E., Evers, B. M., Rychahou, P., Frieboes, H. B., and Bae, Y. (2017). “Development of Halofluorochromic Polymer Nanoassemblies for the Potential Detection of Liver Metastatic Colorectal Cancer Tumors Using Experimental and Computational Approaches.” Pharmaceutical Research, 34(11), 2385-2402.
Rong, Z., Meysam, A., Adel, A., Ruchira, D., Jasinksi, J., Rukshan, M. T., and Gamini, U. S. (2017). “Electrical transport properties of graphene nanowalls grown at low temperature using plasma enhanced chemical vapor deposition.” Materials Research Express, 4(5), 055007.
Rouchka, E. C. (2017). “Correction to: Proceedings of the 16th Annual UT_KBRIN Bioinformatics Summit 2017: proceedings.” BMC Proceedings, 11(1), 20.
Rouchka, E. C., Chariker, J. L., Tieri, D., and Park, J. W. (2017). “Correction to: Proceedings of the 16th Annual UT_KBRIN Bioinformatics Summit 2017: bioinformatics.” BMC Bioinformatics, 18(1), 490.
Russ, A., Melton, B., Daggy, J., and Saleem, J. J. (2017). “Pilot evaluation of a method to assess prescribers’ information processing of medication alerts.” Journal of Biomedical Informatics, 66, 11-18.
Saka, E., Harrison, B. J., West, K., Petruska, J. C., and Rouchka, E. C. (2017). “Framework for reanalysis of publicly available Affymetrix(R) GeneChip(R) data sets based on functional regions of interest.” BMC Genomics, 18(Suppl 10), 875.
Salgaeva, U., Zhao, R., Mushinsky, S., Jasinski, J., Fu, X.-A., Dharmasena, R., and Sumanasekera, G. (2017). “Photoluminescence in functionalized/doped graphene quatum dots: Role of surface states.” Journal of Nanomaterials and Molecular Nanotechnology, 6(2), 1000215.
Sanford, J., Patterson, R., and Popa, D. O. (2017). “Concurrent surface electromyography and force myography classification during times of prosthetic socket shift and user fatigue.” Journal of Rehabilitation and Assistive Technologies Engineering, 4, 2055668317708731.
Schultz, D. J., Muluhngwi, P., Alizadeh-Rad, N., Green, M. A., Rouchka, E. C., Waigel, S. J., and Klinge, C. M. (2017). “Genome-wide miRNA response to anacardic acid in breast cancer cells.” PLoS One, 12(9), e0184471.
Sethi, T. S., and Kantardzic, M. M. (2017). “On the reliable detection of concept drift from streaming unlabeled data.” Expert Systems with Applications, 82, 77-99.
Shalaby, A., Taher, F., El-Baz, M., Ghazal, M., Abou El-Ghar, M., Taqieldeen, A., and El-Baz, A. S. (2017). “Probabilistic Modeling of Blood Vessels for Segmenting Magnetic Resonance Angiography Images.” Medical Research Archives, 5(3).
Sharp, M. K., Gregg, M., Brock, G., Nair, N., Sahetya, S., Austin, E. H., Maascio, C., Slaughter, M. D., and Pantalos, G. M. (2017). “Comparison of Blood Viscoelasticity in Pediatric and Adult Cardiac Patients.” Cardiovascular Engineering and Technology, 8(2), 182-192.
Sherwood, L. C., Aqil, F., Vadhanam, M. V., Jeyabalan, J., Munagala, R., Hoetker, D., Srivastava, S., Singh, I. P., Cambron, S. D., and OToole, M. G. (2017). “Development of a goat model for evaluation of withaferin A: Cervical implants for the treatment of cervical intraepithelial neoplasia.” Experimental and molecular pathology, 103(3), 320-329.
Shrestha, S., and Chou, K. (2017). “A Build Surface Study of Powder-Bed Electron Beam Additive Manufacturing by 3D Thermo-fluid Simulation and White-light Interferometry.” International Journal of Machine Tools and Manufacture, 121, 37-49.
Sims, L. B., Huss, M. K., Frieboes, H. B., and Steinbach-Rankins, J. M. (2017). “Distribution of PLGA-modified nanoparticles in 3D cell culture models of hypo-vascularized tumor tissue.” Journal of nanobiotechnology, 15(1), 67.
Smelter, A., Rouchka, E. C., and Moseley HNB (2017). “Detecting and accounting for multiple sources of positional variance in peak list registration analysis and spin system grouping.” Journal of Biomolecular NMR, 68(4), 281-296.
Soliman, A., Khalifa, F., Elnakib, A., Abou El-Ghar, M., Dunlap, N., Wang, B., Gimelfarb, G., Keynton, R., and El-Baz, A. (2017). “Accurate Segmentation of Pathological Lungs using Adaptive Shape Guided by CT Images Appearance.” IEEE Transactions of Medical Imaging, 36(1), 263-276.
Soliman, M., Andreeva, K., Nasraoui, O., and Cooper, N. G. F. (2017). “A causal mediation model of ischemia reperfusion injury in the retina.” PLoS One, 12(11), e0187426.
Song, M., Li, X., Zhang, X., Shi, H., Vos, M., Wei, X., Wang, Y., Gao, H., Rouchka, E. C., Yin, X., Zhou, X., Prough, R., Cave, M., and McClain, C. (2017). “Dietary copper-fructose interactions alter gut microbial activity in male rats.” American Journal of Physiology – Gastrointestinal and Liver Physiology, 413(1), 119-130.
Soucy, K. G., Bartoli, C., Phillips, D., Giridharan, G. A., Sobieski, M. A., Wead, W., Dowling, R., Wu, Z., Prabhu, S., Slaughter, M., and Koenig, S. C. (2017). “Continuous Flow Left Ventricular Assist Device Improves Relative Myocardial Perfusion in Chronic Heart Failure.” Ann Biomed End., 45(6), 1475-1486.
Soucy, K. G., Koenig, S. C., and Slaughter, M. S. (2017). “Intra-aortic balloon pumps and continuous flow left ventricular assist devices: Dont let balloon pumps overstay their welcome.” The Journal of Thoracic and Cardiovascular Surgery, 153(1), e9-e10.
Stillman, M. D., Bertocci, G. E., Smalley, C., Williams, S. J., and Frost, K. L. (2017). “Healthcare utilization and associated barriers experienced by wheelchair users: A pilot study.” Disability and health journal, 10(4), 502-508.
Sun, Z., Liu, F., Tong, T., Qi, C., and Yu, Q. (2017). “Hydration of Concrete Containing Hybrid Recycled Demolition Powders.” Journal of Materials in Civil Engineering, 29(7).
Tamiya, S., Chauhan, R., Balgemann, R., Noma, H., McDonald, K., Kaplan, H. J., and OToole, M. G. (2017). “Production and characterization of a sustained release system of dasatinib to prevent proliferative vitreoretinopathy.” Investigative Ophthalmology & Visual Science, 58(8), 4759-4759.
Tennill, T., Gross, M., and Frieboes, H. B. (2017). “Automated analysis of co-localized protein expression in histologic sections of prostate cancer.” PLoS ONE, 12(5).
Thomas, J. M., Shakeri, M., Sharp, M. K., and Berson, R. E. (2017). “Validation of a CFD Model of an Orbiting Culture Dish with PIV and Analytical Solutions.” AICHE Journal, 63(9), 4233-4244.
Toh, S. S., Chen, Z., Rouchka, E. C., Schultz, D. J., Cuomo, C. A., and Perlin, M. H. (2017). “Pas de deux: An Intricate Dance of Anther Smut and Its Host.” G3 (Bethesda, Md.), 8(2), 505-518.
Trainor, P. J., Hill, B. G., Carlisle, S. M., Rouchka, E. C., Rai, S. N., Bhatnagar, A., and DeFilippis, A. P. (2017). “Systems characterization of differential plasma metabolome perturbations following thrombotic and non-thrombotic myocardial infarction.” Journal of Proteomics, 160, 38-46.
Tyo, K. M., Vuong, H. R., Malik, D. A., Sims, L. B., Alatassi, H., Duan, J., Watson, W. H., and Steinbach-Rankins, J. M. (2017). “Multipurpose tenofovir disoproxil fumarate electrospun fibers for the prevention of HIV-1 and HSV-2 infections in vitro.” International journal of pharmaceutics, 531(1), 118-133.
Usher, J. S., Aslam, M., Hardin, C. T., and Jun, C.-H. (2017). “A Repetitive Availability Demonstration Testing Procedure.” Journal of Testing and Evaluation, 45(3), 1016-1021.
Vu, V. P., Wang, W. J., Chen, H. C., and Zurada, J. M. (2017). “Unknown Input Based Observer Synthesis for a Polynomial T-S Fuzzy Model System with Uncertainties.” IEEE Transactions on Fuzzy Systems, PP(99), 1-1.
Vu, V. P., Wang, W. J., Zurada, J. M., Chen, H. C., and Chiu, C. H. (2017). “Unknown Input Method Based Observer Synthesis for A Discrete Time Uncertain T-S Fuzzy System.” IEEE Transactions on Fuzzy Systems, PP(99), 1-1.
Vuong, H. R., Tyo, K. M., and Steinbach-Rankins, J. M. (2017). “Fabrication and Characterization of Griffithsin-modified Fiber Scaffolds for Prevention of Sexually Transmitted Infections.” Journal of visualized experiments : JoVE(128).
Wang, J., Cai, Q., Chang, Q., and Zurada, J. M. (2017). “Convergence analyses on sparse feedforward neural networks via group lasso regularization.” Information Sciences, 381, 250-269.
Wang, X., and Chou, K. (2017). “Effects of thermal cycles on the microstructural evolution of Inconel 718 during selective laser melting process.” Additive Manufacturing, 18, 1-14.
Wang, X., and Chou, K. (2017). “Electron Backscatter Diffraction Analysis of Inconel 718 Parts by Selective Laser Melting Additive Manufacturing.” The Journal of The Minerals, Metals & Materials Society, 69(2), 402-408.
Wang, X., Gong, X., and Chou, K. (2017). “Review on Laser-Based Additive Manufacturing of Inconel 718.” Journal of Engineering Manufacture, 231(11), 1890-1903.
Wang, Y., Fullon, R., Acerce, M., Petoukhoff, C. E., Yang, J., Chen, C., Du, S., Lai, S. K., Lau, S. P., Voiry, D., OCarroll, D., Gupta, G., Mohite, A. D., Zhang, S., Zhou, H., and Chhowalla, M. (2017). “Solution-Processed MoS2/Organolead Trihalide Perovskite Photodetectors.” Advanced Materials, 29(4).
Wang, Y., Koenig, S. C., Sobieski, M. A., Slaughter, M. S., and Giridharan, G. A. (2017). “Hemodynamic benefits of implantable, percutaneous, and intraaortic rotary blood pumps and counterpulsation devices: an in-silico and in-vitro study.” Cardiovascular Engineering and Technology, 8(4), 439-452.
Wang, Y., Koenig, S. C., Wu, Z., Slaughter, M. S., and Giridharan, G. A. (2017). “Sensor-Based Physiologic Control Strategy for Biventricular Support with Rotary Blood Pumps.” ASAIO journal (American Society for Artificial Internal Organs : 1992).
Wang, Y., Koenig, S. C., Wu, Z., Slaughter, M. S., and Giridharan, G. A. (2017). “Sensor-Based Physiologic Control Strategy for Biventricular Support with Rotary Blood Pumps.” ASAIO Journal, Online First.
Ware, M. J., Curtis, L. T., Wu, M., Ho, J. C., Corr, S. J., Curley, S. A., Godin, B., and Frieboes, H. B. (2017). “Pancreatic adenocarcinoma response to chemotherapy enhanced with non-invasive radio frequency evaluated via an integrated experimental/computational approach.” Scientific Reports, 7(1), 3437.
White, R. T., Kumar, B., Kumari, S., and Spurgeon, J. M. (2017). “Simulations of non-monolithic tandem solar cell configurations for electrolytic fuel generation.” Journal of Materials Chemistry A, 5(25), 13112-13121.
Yamaguchi, H., Liu, F., DeFazio, J., Narvaez Villarrubia, C. W., Finkenstadt, D., Shabaev, A., Jensen, K. L., Pavlenko, V., Mehl, M., Lambrakos, S., Gupta, G., Mohite, A. D., and Moody, N. A. (2017). “Active bialkali photocathodes on free-standing graphene substrates.” npj 2D Materials and Applications, 1(1), 12.
Yampolskiy, R. V. (2017). “What are the ultimate limits to computational techniques: verifier theory and unverifiability.” Physica Scripta, 92(9).
Yan, H., Romero-López, M., Benitez, L., Di, K., Frieboes, H. B., Hughes, C., Bota, D., and Lowengrub, J. (2017). “3D mathematical modeling of glioblastoma suggests that transdifferentiated vascular endothelial cells mediate resistance to current standard-of-care therapy.” Cancer Research, 77(15), 4171-4184.
Yan, H., Romero-López, M., Frieboes, H. B., Hughes, C. C. W., and Lowengrub, J. S. (2017). “Multiscale Modeling of Glioblastoma Suggests that the Partial Disruption of Vessel/Cancer Stem Cell Crosstalk Can Promote Tumor Regression Without Increasing Invasiveness.” Ieee T Bio-Med Eng, 64(3), 538-548.
Yao, S., Flight, R. M., Rouchka, E. C., and Moseley, H. N. (2017). “Aberrant coordination geometries discovered in the most abundant metalloproteins.” Proteins, 85(5), 885-907.
Yao, S., Flight, R. M., Rouchka, E. C., and Moseley, H. N. (2017). “Perspectives and expectations in structural bioinformatics of metalloproteins.” Proteins, 85(5), 938-944.
Zeng, H., Hou, Y. T., Shi, Y., Lou, W., Kompella, S., and Midkiff, S. F. (2017). “A distributed scheduling algorithm for underwater acoustic networks with large propagation delays.” IEEE Transactions on Communications, 65(3), 1131–1145.
Zeng, H., Qin, X., Yuan, X., Shi, Y., Hou, Y. T., and Lou, W. (2017). “Cooperative Interference Neutralization in Multi-hop Wireless Networks.” IEEE Transactions on Communications, 66(2), 889-903.
Zeng, H., Shi, Y., Hou, Y. T., Lou, W., Yuan, X., Zhu, R., and Cao, J. (2017). “OFDM-Based Interference Alignment in Single-Antenna Cellular Wireless Networks.” IEEE Transactions on Communications, 65(10), 4492–4506.
Zhan, S., Zhong, Y., Zhang, Z., Zhong, D., and Zhang, H. (2017). “Comparative analysis of selection schemes used in artificial bee colony algorithm.” International Journal of Computing Science and Mathematics, 8(1752-5055).
Zhang, H. (2017). “Closed-loop Big Data Analysis with Visualization and Scalable Computing.” Elsevier Big Data Research, 8(2214-5796).
Zhang, H., and Hui, Q. (2017). “Parallel Multiagent Coordination Optimization Algorithm: Implementation, Evaluation, and Applications.” IEEE Transactions on Automation Science and Engineering, 14(2), 984-995.
Zhang, W., Wang, D., and Inanc, T. (2017). “A Multi-Phase DMOC-based Trajectory Optimization Method.” Optimal Control, Applications and Methods, 39(1), 114-129.
Zhao, Q., and Burns, S. E. (2017). “Molecular simulation of electrokinetics of montmorillonite surface coated with hexadecyltrimethylammonium cations.” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 516, 354-361.
Zhong, Y., Lin, J., Wang, L., and Zhang, H. (2017). “Hybrid discrete artificial bee colony algorithm with threshold acceptance criterion for traveling salesman problem.” Journal of Information Sciences, 421, 70-84.
Zhou, K., Shi, T., and Cai, L. (2017). “Journal of Manufacturing Processes.”
Zhou, R., Park, J. W., Chun, R. F., Lisse, T. S., Garcia, A. J., Zavala, K., Sea, J. L., Lu, Z.-x., Xu, J., Adams, J. S., Xing, Y., and Hewison, M. (2017). “Concerted effects of heterogeneous nuclear ribonucleoprotein C1/C2 to control vitamin D-directed gene transcription and RNA splicing in human bone cells.” Nucleic Acids Research, 45(2), 606-618.
Ziesche, S., and Yampolskiy, R. V. (2017). “High Performance Computing of Possible Minds.” International Journal of Grid and High Performance Computing (IJGHPC), 9(1), 37–47.
Ziolkowska, D. A., Jangam, J. S. D., Rudakov, G., Paronyan, T. M., Akhtar, M., Sumanasekera, G. U., and Jasinski, J. B. (2017). “Simple synthesis of highly uniform bilayer-carbon nanocages.” Carbon, 115, 617-624.
Conference Proceedings
Abdollahi, B., and Nasraoui, O. (2017). “Using Explainability for Constrained Matrix Factorization.” Proceedings of the Eleventh ACM Conference on Recommender Systems – RecSys 17. Como, Italy.
Arabmakki, E., and Kantardzic, M. M. (2017). “A Partial Labeling Framework for Multi-Class Imbalanced Streaming Data.” International Joint Conference on Neural Networks (IJCNN 2017). Anchorage, AK, USA 1018-1025.
Badami, M., Nasraoui, O., Sun, W., and Shafto, P. (2017). “Detecting Polarization in Ratings: An Automated Pipeline and a Preliminary Quantification on Several Benchmark Data Sets.” 2017 International Workshop on Big Social Media Data Management, IEEE International Conference on Big Data. Boston, MA.
Bae, K. H., and Zheng, L. (2017). “An analytical study on horizontally collaborative transportation strategies.” IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) Singapore, Singapore
Bai, J.-W., Carballo, G. J., Carrillo, J. R., and Kim, Y. H. (2017). “Probabilistic Model for Predicting Early Creep of Self-Consolidating Concrete Containing SCMs.” ICOSSAR 2017: 12th International Conference on Structural Safety & Reliability. Vienna, Austria.
Bandiwadekar, B., Vunnam, S., Park, J., Oh, J. W., Park, S. J., Atre, S. V., and Kate , K. H. (2017). “Influence of Feedstock Property Estimates and Measurements on Powder Injection Molding of PZT Micro-array.” Powdermet 2017. Las Vegas, USA, 151-161.
Baptist, J. R., Zhang, R., Wei, D., Saadatzi, M. N., and Popa, D. O. (2017). “Fabrication of strain gauge based sensors for tactile skins.” SPIE Commercial + Scientific Sensing and Imaging. 10.
Cerulli, R., DAmbrosio, C., and Gentili, M. (2017). “Best and Worst Values of the Optimal Cost of the Interval Transportation Problem.” Optimization and Decision Science: Methodologies and Applications. ODS 2017. Sorrento, Italy, 367-374.
Cha, J. w., Farhangi, M. M., Dunlap, N., and Amini, A. A. (2017). “Volumetric Analysis of Respiratory Gated Whole Lung and Liver CT Data with Motion-Constrained Graph Cuts Segmentation.” IEEE Engineering in Medicine and Biology Conference. Jeju Island, South Korea, 3405-3408.
Chaabane, M., Rouchka, E. C., and Park, J. W. (2017). “Circular RNA Detection from High-throughput Sequencing.” Proceedings of the International Conference on Research in Adaptive and Convergent Systems (RACS 2017). New York, 19-24.
Chen, R., and Zhang, H. (2017). “Large-scale 3D Reconstruction with an R-based Analytics Workflow.” Proceeding BDCAT 17 Proceedings of the Fourth IEEE/ACM International Conference on Big Data Computing, Applications and Technologies. Austin, Texas, 85-93.
Cheng, B., and Chou, K. (2017). “Overhang Support Structure Design for Electron Beam Additive Manufacturing.” Proceedings of the ASME 2017 Manufacturing Science and Engineering Conference. Los Angeles, California, MSEC2017-3018.
Cheng, B., and Chou, K. (2017). “Preliminary Testing of Temperature Measurements in Selective Laser Melting.” Proceedings of the ASME 2017 Manufacturing Science and Engineering Conference. Los Angeles, California, MSEC2017-3016.
Cheng, B., Lydon, J., Cooper, K., Cole, V., Northrop, P., and Chou, K. (2017). “Melt Pool Dimension Measurement in Selective Laser Melting.” Proceedings of 2017 Solid Freeform Fabrication Symposium. Austin, Texas, 1252-1263.
Corley, W., and McNeil, J. C. (2017). “Exploring Nontraditional Characteristics of Students in a Freshman Engineering Course.” American Society of Engineering Education. Columbus, Ohio.
Corley, W., and McNeil, J. C. (2017). “Stickiness of Nontraditional Students in Engineering.” American Society of Engineering Education. Columbus, Ohio.
Das, S. K., Sahu, A., and Popa, D. O. (2017). “Mobile app for human-interaction with sitter robots.” SPIE Commercial + Scientific Sensing and Imaging.
Dekhil, O., Ismail, M., Shalaby, A., Switala, A., Elmaghraby, A. S., Keynton, R. S., Gimelfarb, G., Barnes, G., and El-Baz, A. S. (2017). “A novel CAD system for autism diagnosis using structural and functional MRI.” 2017 IEEE 14th International Symposium on Biomedical Imaging (ISBI 2017). Melbourne, Australia.
Demir, M., Koker, R., and Kantardzic, M. M. (2017). “Vision Based Classification of Hand Gestures Towards Human Robot Interaction by Using Neural Network.” Proceedings of the International Conference on Recent Trends in Science, Engineering, Computers and Technology, (RTSECT-2017). Singapore.
Desoky, A. H., Asghari, M., and Shahrjooihaghighi, A. (2017). “Dimensionality Reduction using Hadamard, Discrete Cosine and Discrete Fourier Transforms in SAS.” MSUG 2017 Paper AA11. Orange Beach, Alabama.
Desoky, A. H., and El-Hadik, S. (2017). “Cognitive Performance Application.” IEEE Symposium on Signal Processing and IT (ISSPIT) 2017. Bilbao, Spain.
Elgazzar, H., and Elmaghraby, A. S. (2017). “Network Science Algorithms for Mobile Network Analytics.” IEEE SoutheastCon-Proceedings. Concord, NC, USA.
El-Zahraa , F., El-Gamal, A., Elmogy, M., Ghazal, m., Atwan, A., Barnes, G., Casanova, M., Keynton , R., and El-Baz, A. S. (2017). “A Novel CAD System for Local and Global Early Diagnosis of Alzheimer’s Disease Based on PIB-PET Scans.” ICIP. Beijing, China.
Evans, L., Bae, K.-H., and Roy, A. (2017). “Single and Multi-Objective Parameter Estimation of a Military Personnel System via Simulation Optimization.” Winter Simulation Conference. Las Vegas, Nevada.
Foreman, J. C., and Pacheco Chiguano, F. E. (2017). “Aggregation Architecture for Data Reduction and Privacy in Advanced Metering Infrastructure.” IEEE PES Conference on Innovative Smart Grid Technologies Latin America. Quito, Equador, 1-4.
Ghasemi-Fare, O., and Basu, P. (2017). “Role of thermally induced buoyant flow in altering energy harvesting through geUnpublished Workmal piles.” Geotechnical Frontiers 2017- ASCE. Orlando, FL.
Ghasemi-Fare, O., and Pak, A. (2017). “Prediction of maximum soil lateral displacement occurred during liquefaction-induced lateral spreading.” Geotechnical Frontiers 2017- ASCE. Orlando, FL.
Ghithan, J. H., Moreno, M., OToole, M. G., and Mendes, S. B. (2017). “Characterization of an Immunoassay Assembly on an Electro-Active Waveguide Platform.” Optical Sensors. New Orleans, Louisiana, SeTu2E. 2.
Ghithan, J. H., Moreno, M., Sombrio, G. B., OToole, M. G., and Mendes, S. B. (2017). “Avian Influenza Virus Immunosensor Using Single-Mode, Electro-Active, Integrated Optical Waveguide.” Bio-Optics: Design and Application. San Diego, California, BoS2A. 6.
Hall, L., Harris, B., Tomes, E., and Altiparmak, N. (2017). “Big Data Aware Virtual Machine Placement in Cloud Data Centers.” 4th IEEE/ACM International Conference on Big Data Computing, Applications and Technologies (BDCAT 2017). Austin, Texas.
Harnett, C. K. (2017). “Tobiko: A Contact Array for Self-Configuring, Surface-Powered Sensors.” Proceedings of the 2017 ACM Conference on Human Factors in Computing Systems. Denver, CO, USA, 2024-2028.
Harnett, C. K., and Wagner, B. P. (2017). “Expanding the Robotics Materials Set with Machine Embroidery.” Proceedings of RSS Materials Workshop: Bridging Materials Science and Robotics. Corvallis, Oregon.
Hendrix, A., and Yampolskiy, R. V. (2017). “Automated IQ Estimation from Writing Samples.” The 28th Modern Artificial Intelligence and Cognitive Science Conference (MAICS2017). Fort Wayne, IN, 3-7.
Hieb, J. L., William B. Corley, and McNeil, J. C. (2017). “Flipping Calculus for Engineering Students: Pre-class Assignments and Readiness Assessment Strategies.” 2017 ASEE Annual Conference & Exposition. Columbus, Ohio.
Honken, N., and Ralston, P. A. (2017). “High School Extracurricular Activities and Camps Related to Engineering, Math and Science: Do They Help Retention and Performance in Engineering?” 2017 ASEE Annual Conference & Exposition. Columbus, Ohio.
Hu, H., and Kantardzic, M. M. (2017). “Sliding Reservoir Approach for Delayed Labeling in Streaming Data Classification.” Proceedings of the 50th Hawaii International Conference on System Sciences- HICSS 2017. Waikoloa, HI.
Hundley, M. V., and Yampolskiy, R. V. (2017). “Shortest Total Path Length Spanning Tree via Wisdom of Artificial Crowds Algorithm.” The 28th Modern Artificial Intelligence and Cognitive Science Conference (MAICS2017). Fort Wayne, IN, 77–84.
Ismail, M., Barnes, G., Nitzken, M., Switala, A., Shalaby, A., Hosseini-Asl, E., Casanova, M., Keynton, R., Khalil, A., and El-Baz, A. S. (2017). “A New Deep-Learning CAD System for Early Diagnosis of Autism using Structural MR.” ICIP. Beijing, China.
Kantardzic, M. M., and Zurada, J. (2017). “Introduction to Streaming Data Analytics and Applications Minitrack.” Proceedings of the 50th Hawaii International Conference on System Sciences (HICSS)- 2017. Waikoloa, HI, 1437-1438.
Khalifa, F., Shehata, M., Soliman, A., Abou El-Ghar, M., El-Diasty, T., Dwyer, A. C., El-Melegy, M., Gimelfarb, G., Keynton, R. S., and El-Baz, A. S. (2017). “A generalized MRI-based CAD system for functional assessment of renal transplant.” 2017 IEEE 14th International Symposium on Biomedical Imaging (ISBI 2017). Melbourne, Australia.
Latham, J., Mohebbi, M., and McIntyre, M. L. (2017). “Output Feedback Control of a Single Phase Voltage Source Inverter Utilizing a Variable Structure Observer.” American Control Conference. Seattle, Washington, 6.
Lin, J.-T., Shuvra, P. D., Liao, W., McNamara, S., Walsh, K. M., Arutt, C. N., Gong, H., Davidson, J. L., Alles, M. L., and Alphenaar, B. W. (2017). “Surface Carrier Concentration Effect on Elastic Modulus of Piezoelectric MEMS Silicon Cantilevers.” 19th International Conference on Solid-State Sensors, Actuators, and Microsystems (Transducers 2017). Kaohsiung, Taiwan.
McGinley, W. M., and Nemati, F. (2017). “Modelling of Masonry Infill Walls with and Without Openings.” 13th Canadian Masonry Symposium. Halifax , NS, Canada, 12.
McGinley, W. M., Throop, D., and Coulbourne, W. L. (2017). “Tornado and High Wind Sheltering With Masonry.” 13th Canadian Masonry Symposium. Halifax , NS, Canada, 12.
McNeil, J. C., Andrade, M., and Beebe, A. (2017). “The Students Experience Coming Back After Cooperative Education Experiences.” American Society of Engineering Education. Columbus, OH.
McNeil, J. C., Beebe, A., and Andrade, M. (2017). “Transitions Between Cooperative Eductional Experiences to the University.” IEEE: Frontiers in Education Conference. Indianapolis, IN, USA.
McNeil, J. C., Corley, W., and Hieb, J. (2017). “Investigating Psychological Safety in a Flipped Engineering Course.” IEEE: Frontiers in Education Conference. Indianapolis, IN, USA.
Mesbah, S., Shalaby, A., Willhite, A., Harkema, S., Rejc, E., and El-Baz, A. S. (2017). “Automatic 3-D Muscle and Fat Segmentation of Thigh Magnetic Resonance Images In Individuals With Spinal Cord Injury.” ICIP. Beijing, China, China
Miller, H. L., Bugnariu, N., Patterson, R. M., Wijayasinghe, I., and Popa, D. O. (2017). “Development of a novel visuomotor integration paradigm by integrating a virtual environment with mobile eye-tracking and motion-capture systems.” 2017 International Conference on Virtual Rehabilitation (ICVR). 1-6.
Miyanaji, H., Akbar, J. M., and Yang, L. (2017). “Fabrication and Characterization of Graphite/Nylon 12 Composite via Binder Jetting Additive Manufacturing Process.” Annual International Solid Freeform Fabrication Symposium. Austin, Texas, 593.
Mohebbi, M., and McIntyre, M. L. (2017). “A Filter-Based Adaptive Nonlinear Controller for Robust Sensorless Control of an H-Bridge Inverter with Output LC Filter.” American Control Confrence. Seattle, Washington, 6.
Mohebbi, M., and McIntyre, M. L. (2017). “A filter-based controller for a buck converter.” 2017 IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL). Palo Alto, California, 5.
Mohebbi, M., McIntyre, M. L., and Latham, J. (2017). “A Backstepping Controller for Voltage Source Inverter with Inductor Current and Output Current Observers.” IEEE Power and Energy Conference (PECI). Champaign, IL, USA.
Mohebbi, M., McIntyre, M. L., and Latham, J. (2017). “A Learning Backstepping Controller for Voltage Source Inverter with Nonlinear Loads.” IEEE Power and Energy Conference (PECI). Champaign, IL, USA.
Mohebbi, M., McIntyre, M. L., and Latham, J. (2017). “Nonlinear Control of Standalone Inverter with Unbalanced, Nonlinear Load and Seamless Transition to Grid-Tie.” IEEE Power and Energy Conference (PECI). Champaign, IL, USA.
Naber, J., Kurtz, K., and Guthrie, M. (2017). “Improved Modeling of Surface Degraded Sintered NdFeB Magnets with Large SA/V Ratios.” IEEE Magnetism and Magnetic Materials. Pittsburgh, PA.
Nutakki, G. C., and Nasraoui, O. (2017). “Clustering Data Streams with Adaptive Forgetting.” 2017 IEEE International Congress on Big Data. Boston, MA, USA, 494-497.
Paa, Honken, N., and Ralston, P. A. (2017). “Relationship between the Number of Reasons Students Cited to Study Engineering and Their Retention and Graduation Rates.” 2017 ASEE Annual Conference & Exposition. Columbus, Ohio.
Painter, J., Snyder, K., and Ralston, P. A. (2017). “Why Engineering? Students Reasons for Choosing an Engineering Major.” 2017 ASEE Annual Conference & Exposition. Columbus, OH.
Quesada, P. M., Groeschen, C., and Mueller, B. (2017). “Effects of Cognitive Tasks and Depth Perception on Elderly Balance on a Stable and Two Passively Unstable Surfaces.” Conference. Salt Lake City, Utah, 69-70.
Quesada, P. M., and Ritter, A. (2017). “Effects of Varying Upper Limb Usage and Resistance Settings on Muscle Activity during Elliptical Machine Exercise.” GCMAS. Salt Lake City, Utah.
Read, J., and Saleem, J. J. (2017). “Task performance and situational awareness with a virtual reality head-mounted display.” Proceedings of the Human Factors and Ergonomics Society 61st Annual Meeting. Austin, Texas, 2105-2109.
Rightmyer, C., Barrow, I., and Ralston, P. A. (2017). “Identifying Bottlenecks in Undergraduate Engineering Mathematics: Calculus I through Differential Equations.” 2017 ASEE Annual Conference & Exposition. Columbus, Ohio.
Rightmyer, C., Lyle, K., Hieb, J. L., and Ralston, P. A. (2017). “Retrieval Practice and Spacing in an Engineering Mathematics Classroom: Do the Effects Add Up?” 2017 ASEE/IEEE Frontiers in Education Conference. Indianapolis, Indiana.
Rightmyer, C., Ralston, P. A., and Barrow, I. (2017). “An Intervention in Engineering Mathematics: Flipping the Differential Equations Classroom.” 2017 ASEE Annual Conference & Exposition. Columbus, Ohio.
Rivera, P., and McIntyre, M. L. (2017). “Nonlinear control for single-stage single-phase grid-connected photovoltaic systems.” 2017 IEEE 18th Workshop on Control and Modeling for Power Electronics (COMPEL). Padova, Italy, 7.
Rivera, P., and McIntyre, M. L. (2017). “Single — stage single — phase grid — connected photovoltaic system with current ripple mitigation based on nonlinear control.” 2017 International Conference on ENERGY and ENVIRONMENT (CIEM). Bucharest, Romania.
Rivera, P., and McIntyre, M. L. (2017). “Single — Stage three — Phase grid — Connected photovoltaic system with maximum power tracking and active and reactive power control based on nonlinear control.” 2017 IEEE Energy Conversion Congress and Exposition (ECCE). Cincinnati, Ohio.
Roy, A., and Bai, L. (2017). “Control of HVAC System in Residential Buildings using Model Predictive Control: Plant Model Selection.” Proceedings of the 2017 Industrial and Systems Engineering Conference. Pittburgh, Pennsylvania, 1538-1543.
Saadatzi, M. N., Baptist, J. R., Wijayasinghe, I. B., and Popa, D. O. (2017). “Characterization of large-area pressure sensitive robot skin.” SPIE Commercial + Scientific Sensing and Imaging. 9.
Saadatzi, M. N., Yang, Z., Baptist, J. R., Sahasrabuddhe, R. R., Wijayasinghe, I. B., and Popa, D. O. (2017). “Parametric investigation of scalable tactile sensors.” SPIE Commercial + Scientific Sensing and Imaging. 10.
Salahat, S., Soliman, A., McGloughlin, T., Werghi, N., and El-Baz, A. (2017). “Segmentation of Abdominal Aortic Aneurysm (AAA) Based on Topology Prior Model.” Cham, 219-228.
Sethi, T. S., Kantardzic, M. M., and Ryu, J. W. (2017). “`Security Theater: On the Vulnerability of Classifiers to Exploratory Attacks.” The Pacific-Asia Conference on Knowledge Discovery and Data Mining (PAKDD 2017) Workshop. Jeju, South Korea, pp. 49-63.
Shaffie, A., Soliman, A., Ghazal, m., taher, F., Dunlap, N., Wang, B., Elmaghraby, A., Gimel’farb, G., and El-Baz, A. S. (2017). “A New Framework For Incorporating Appearance And Shape Features of Lung Nodules for Precise Diagnosis Of Lung Cancer.” ICIP. Bejing. China.
Shrestha, S., and Chou, K. (2017). “Process Effect on Part Surface Roughness in Powder-Bed Electron Beam Additive Manufacturing.” Proceedings of the ASME 2017 Manufacturing Science and Engineering Conference. Los Angeles, California, MSEC2017-3015.
Shrestha, S., and Chou, K. (2017). “Thermo-Fluid Modeling of Selective Laser Melting Considering Powder Particle Characteristics.” Proceedings of 2017 Materials Science & Technology Conference. Pittsburgh, Pennsylvania, 1140-1142.
Soliman, A., Shalaby, A., Khalifa, F., Shaffie, A., Dunlap, N., Wang, B., Elmaghraby, A., Gimelfarb, G., Ghazal, M., and El-Baz, A. S. (2017). “A Comprehensive Framework for Early Assessment of Lung Injury.” ICIP. Bejing, China.
Thompson, A. K. (2017). “Fostering Development of Teamwork Skills in an Introductory Engineering Course.” Frontiers in Education Conference. Indianapolis, Indiana.
Tinnell, T., and McNeil, J. C. (2017). “WIP: First-Year Students Definitions of Engineering Practice.” American Society of Engineering Education. Alington, Virginia.
Tomes, E., and Altiparmak, N. (2017). “A Comparative Study of HDD and SSD RAIDs’ Impact on Server Energy Consumption.” 2017 IEEE International Conference on Cluster Computing (CLUSTER). Hawaii, USA.
Turner, J., and Kantardzic, M. M. (2017). “Geo-Social Analytics Based on Spatio-Temporal Dynamics of Marijuana-Related Tweets.” Proceedings of the International Conference on Information System and Data Mining ICISDM 2017. Charleston, South Carolina.
Warrier, N., and Kate , K. H. (2017). “Fused Filament Fabrication 3D Printing with Low-Melting Alloys.” AMPM 2017. Las Vegas, Nevada, 144-150.
Weiler, D. T., and Saleem, J. J. (2017). “Role assignment in high fidelity patient simulation and the effects on nursing students self-efficacy development.” Proceedings of the Human Factors and Ergonomics Society 61st Annual Meeting. Austin, Texas, 671-675.
Weiler, D. T., Villajuan, S., Edkins, L., Cleary, J., and Saleem, J. J. (2017). “Wearable heart rate monitor technology accuracy in research: A comparative study between PPG and ECG technology.” Proceedings of the Human Factors and Ergonomics Society 61st Annual Meeting. Austin. Texas, 1292-1296.
Whiting, J., Lane, B., Cheng, B., and Chou, K. (2017). “Thermal Property Measurement Methods and Analysis for Additive Manufacturing Solids and Powders.” Proceedings of 2017 Solid Freeform Fabrication Symposium. Austin, Texas, 29-28.
Wijayasinghe, I. B., Peetha, S., Abubakar, S., Saadatzi, M. N., Cremer, S., and Popa, D. O. (2017). “Experimental setup for evaluating an adaptive user interface for teleoperation control.” SPIE Commercial + Scientific Sensing and Imaging. 11.
Wijayasinghe, I. B., Sanford, J. D., Abubakar, S., Saadatzi, M. N., Das, S. K., and Popa, D. O. (2017). “Optimal accelerometer placement on a robot arm for pose estimation.” SPIE Commercial + Scientific Sensing and Imaging. 13.
Wu, Y., and Yang, L. (2017). “Modeling of crack propagation in 2D brittle finite lattice structures assisted by additive manufacturing.” Annual International Solid Freeform Fabrication Symposium. Austin, Texas, 2112.
Xie, Z., Raju, M. V., Nantz, M., and Fu, X.-A. (2017). “Electronic Nose for Detection of Toxic Volatile Organic Compounds in Air.” Transducers 2017 (The 19th International Conference on Solid-State Sensors, Actuators and Microsystems). Kaohsiung, Taiwan.
Yang, L., Kim, Y. H., Hay, J., and Kielkopf, J. (2017). “Non-Contact Based Structural Damage Detection using Stochastic Subspace Identification and FEM Updating Method: Model Validation.” Structural Congress. Denver, Colorado.
Yang, L., O’Neil, C., and Wu, Y. (2017). “The Use of Electropolishing Surface Treatment on IN718 Parts Fabricated by Laser Powder Bed Fusion Process.” Annual International Solid Freeform Fabrication Symposium. Austin, Texas, 2493.
Yang, S. C.-H., Whritner, J. A., Nasraoui, O., and Shafto, P. (2017). “Unifying Recommendation and Active Learning for Human-Algorithm Interactions.” In Proceedings of the 39th annual conference of the Cognitive Science Society (CogSci). London.
Zhang, H., Zhong, Y., and Lin, J. (2017). “Divide-and-Conquer Strategies for Large-scale Simulations in R.” Proceedings of 2017 IEEE International Conference on Big Data (BIGDATA). Boston, MA, 3435-3442.
Zhang, J., and Bai, L. (2017). “A location-inventory model for deploying battery swapping and supercharge stations for electric vehicles.” Proceedings of the 2017 Industrial and Systems Engineering Research Conference. Norcross, 1199-1204.
Zhang, R., Yang, Z., Wei, D., and Popa, D. O. (2017). “Design and fabrication of an articulated four axes microrobot arm.” SPIE Commercial + Scientific Sensing and Imaging. 9.
Books & Book Chapters
Callaghan, V., Miller, J., Yampolskiy, R. V., and Armstrong, S. (2017). The Technological Singularity: Managing the Journey, Springer-Verlag GmbH Germany.
Casanova, M., El-Baz, A. S., and Suri, J. (2017). Autism Imaging and Devices, Taylor & Francis.
ElAdwy, N., Elmogy, M., and El-Baz, A. S. (2017). “Early Automatic Detection of Minute Microvasculature Changes in Diabetic Patients Using Optical Coherence Tomography Angiography Retinal Images.” Early Automatic Detection of Minute Microvasculature Changes in Diabetic Patients Using Optical Coherence Tomography Angiography Retinal Images.
Evans, G. W., Depuy, G. W., and Gupta, A. (2017). “A Simulation-Based Optimization Analysis of Retail Outlet Ordering Policies and Vendor Minimum Purchase Requirements in a Distribution System.” Applied Simulation and Optimization 2: New Applications in Logistics, Industrial and Aeronautical Practice, M. M. M., and F. D. L. M. I., eds., Springer, Cham, 225-247.
Foreman, J. C. (2017). “Architecture for Community-scale Critical Infrastructure Coordination for Security and Resilience.” Strategic Cyber Defense: A Multidisciplinary Perspective, T. Unal, and et al., eds., 19.
Fried, J. R. (2017). “Ion Transport through Biomimetic Nanochannel Membranes.” Membranes: Materials, Simulations, and Applications, M.-V. Alfredo, ed.Switzerland, 61-66.
Fried, J. R. (2017). “Ion Transport Through Biomimetic Nanochannel Membranes.” Membranes: Materials, Simulations, and Applications, A. Maciel-Cerda, ed., Springer International Publishing, Cham, 61-66.
Fried, J. R., Dubbs, T., and Azizi, M. (2017). “Ch. 9. Modeling of Si-Containing Polymers.” Membrane Materials for Gas and Vapor Separation: Synthesis and Application to Silicon-containing Polymer, Y. Yuri, and E. Finkelstein, eds.UK, 307-334.
Fried, J. R., Dubbs, T., and Azizi, M. (2017). “Modeling of Si-Containing Polymers.” Membrane Materials for Gas and Vapor Separation, John Wiley & Sons, Ltd, 307-333.
Harnett, C. K., and Wagner, B. P. (2017). Integrating Fibers in Robotics using Automation.
Hassanein, A., Ibrahim, E.-S., Wang, H., and Amini, A. (2017). “Tagging Analysis Techniques – I.” Heart Mechanics – Magnetic Resonance Imaging – Advanced Techniques, Clinical Applications and Future Trends, I. El Sayed, ed., CRC Press.
Jasper, W. J., and Rasipuram, S. (2017). “Plasma textiles as fibrous filter media.” Fibrous Filter Media, 191–210.
Li, Q., Zhang, W., Sathitsuksanoh, N., Goodell, B., and Renneckar, S. (2017). “Towards an understanding of cellulose microfibril dimensions from TEMPO oxidized pulp fiber.” ACS Symposium Series, 55-73.
Li, Z. (2017). “Next-Generation Intersection Control Powered by Autonomous and Connected Vehicle Technologies.” Information Technology and Intelligent Transportation Systems.
Majot, A., and Yampolskiy, R. V. (2017). “Diminishing Returns and Recursive Self Improving Artificial Intelligence.” The Technological Singularity, 141–152.
Mesbah, S., Shalaby, A., Stills, S., Soliman, A., Willhite, A., Harkema, S., Rejc, E., and El-Baz, A. S. (2017). “A Novel Automatic Segmentation Method to Quantify the Effects of Spinal Cord Injury on Human Thigh Muscles and Adipose Tissue.” Medical Image Computing and Computer-Assisted Intervention – MICCAI 2017: 20th International Conference, Quebec City, QC, Canada, September 11-13, 2017, Proceedings, Part II, M. Descoteaux, L. Maier-Hein, A. Franz, P. Jannin, D. L. Collins, and S. Duchesne, eds.Cham, 703–711.
Modares, H., Ranatunga, I., AlQaudi, B., Lewis, F. L., and Popa, D. O. (2017). “Intelligent Human–Robot Interaction Systems Using Reinforcement Learning and Neural Networks.” Trends in Control and Decision-Making for Human–Robot Collaboration Systems, Y. Wang, and F. Zhang, eds., Springer International Publishing, Cham, 153-176.
Rutkowski, L., Korytkowski, M., Scherer, R., Tadeusiewicz, R., Zadeh, L. A., and Zurada, J. M. (2017). “Artificial Intelligence and Soft Computing: 16th International Conference, ICAISC 2017, Zakopane, Poland, June 11-15, 2017, Proceedings, Part I.” Lecture Notes in Artificial Intelligence, Springer International Publishing, XXIV, 776.
Rutkowski, L., Korytkowski, M., Scherer, R., Tadeusiewicz, R., Zadeh, L. A., and Zurada, J. M. (2017). “Artificial Intelligence and Soft Computing: 16th International Conference, ICAISC 2017, Zakopane, Poland, June 11-15, 2017, Proceedings, Part II.” Lecture Notes in Artificial Intelligence, Springer International Publishing, XXIV, 742.
Sokhadze, E., Casanova , M., Kelly, D., Sokhadze, G., Li, Y., Elmaghraby, A., and El-Baz, A. (2017). “Virtual reality with psychophysiological monitoring as an approach to evaluate emotional reactivity, social skills and joint attention in autism spectrum disorder.” Autism Imaging and Devices, A. E.-B. M. Casanova, and J. Suri, eds.
Sotala, K., and Yampolskiy, R. V. (2017). “Responses to the Journey to the Singularity.” The Technological Singularity, 25–83.
Sotala, K., and Yampolskiy, R. V. (2017). “Risks of the Journey to the Singularity.” The Technological Singularity, 11–23.
Yang, L., Hsu, K. H., Baughman, B., Godfrey, D., Medina, F., Menon, M., and Wiener, S. (2017). “Design for Additive Manufacturing.” Additive Manufacturing of Metals: The Technology, Materials, Design and Production, 81-160.
Yang, L., Hsu, K. H., Baughman, B., Godfrey, D., Medina, F., Menon, M., and Wiener, S. (2017). “Electron Beam Technology.” Additive Manufacturing of Metals: The Technology, Materials, Design and Production, 63–79.
Yang, L., Hsu, K. H., Baughman, B., Godfrey, D., Medina, F., Menon, M., and Wiener, S. (2017). “Introduction to Additive Manufacturing.” Additive Manufacturing of Metals: The Technology, Materials, Design and Production, 1–31.
Yang, L., Hsu, K. H., Baughman, B., Godfrey, D., Medina, F., Menon, M., and Wiener, S. (2017). “Microstructure, Mechanical Properties, and Design Considerations for Additive Manufacturing.” Additive Manufacturing of Metals: The Technology, Materials, Design and Production, 45–61.